myresolution_72

I'm trying to reseat my HS&F lol, its hard to get on, hold on

__________________
Ya know moms can be a real pain! Especially when you get a new computer and there so paranoid that they won't let you install a GPU though they know you love computers... I want to be 18 right about now

I wrote that about a year ago. Now look at my first rig after I found a job in my signature! I love buying things for myself and not waiting for someone to give stuff to me.

euphoricmix

Make sure your memory is fully seated in their respective Dimms.

__________________
You are a special, unique individual... just like everybody else.

myresolution_72

I reset the CMOS by moving the pin things and nothing works... I don't know what the problem is, the only time my moniter turns from standby is when i turn the system off, then it turns on then back to stanby. What to do?

__________________
Ya know moms can be a real pain! Especially when you get a new computer and there so paranoid that they won't let you install a GPU though they know you love computers... I want to be 18 right about now

I wrote that about a year ago. Now look at my first rig after I found a job in my signature! I love buying things for myself and not waiting for someone to give stuff to me.

myresolution_72

BUMP you guys, I really need help with this. I hope that my grandma didnt spend $230 for nothing!

__________________
Ya know moms can be a real pain! Especially when you get a new computer and there so paranoid that they won't let you install a GPU though they know you love computers... I want to be 18 right about now

I wrote that about a year ago. Now look at my first rig after I found a job in my signature! I love buying things for myself and not waiting for someone to give stuff to me.

euphoricmix

To clear the CMOS you have to unplug your computer, move your pins, remove the battery, leave it out for around 5 minutes, move the pins back, reinstall the battery and plug your computer back in. Was your memory fully seated? You have to give it quite a bit of pressure at times to get them fully seated.

__________________
You are a special, unique individual... just like everybody else.

euphoricmix

If your memory is fully seated, try the other set of Dimms. If that fails try one stick of memory at a time in the primary slot. Could possibly be a faulty memory module.

__________________
You are a special, unique individual... just like everybody else.

myresolution_72

Ok I'm about to start the 5 mins. for clearing CMOS, hold on

__________________
Ya know moms can be a real pain! Especially when you get a new computer and there so paranoid that they won't let you install a GPU though they know you love computers... I want to be 18 right about now

I wrote that about a year ago. Now look at my first rig after I found a job in my signature! I love buying things for myself and not waiting for someone to give stuff to me.

chuckcalo

Maybe your motherboard can't support that CPU o.o

__________________

vuxdu

maybe switch around the IDE plugs if you have two.. my DFI board does that.. or you need a bios update

__________________

5800 Ownerz Club

myresolution_72

I have a 64 3800+, the MB supports that.

__________________
Ya know moms can be a real pain! Especially when you get a new computer and there so paranoid that they won't let you install a GPU though they know you love computers... I want to be 18 right about now

I wrote that about a year ago. Now look at my first rig after I found a job in my signature! I love buying things for myself and not waiting for someone to give stuff to me.