Fly~Boi

Me and my cousin have build a brand new pc, however i dont have any clue how to use BIOS to make my computer work. because somehow my computer reboots on its own during the installation of any downloaded program from internet. Also i get [RUNDLL32.EXE - Application error. The instruction at "0x77ed4f9a" referened memory at "0xffffffff". The memory could not be "read".] only when i use 8GB of ram during OS installation. And now my computer doesnt even start at all when i click the start putton on the pc case, the only thing i get is black screen. What should I do???????????????? I'm so confused.............
And here here my system
||
▼

HAYWIREFIVE

clear the cmos
boot to bios and set all setting to normal

__________________
4 GHz Overclock Club

HAYWIREFIVE

make sure that first boot is hdd
and if still has the same problem
i would do a fresh install hope this helps

__________________
4 GHz Overclock Club

Fly~Boi

Let me try it now, and thanks in advance.

Fly~Boi

Tried to clear the cmos, but still black screen. Does that mean that my Video card is not working anymore because of no screen at all???

Fly~Boi

First off all i cant seem to boot my pc properly,
because When I turn on my computer I get a
blank, black screen..........

ShaunBarlow

try a different monitor. If you have an internal graphics chip on your motherboard, Hook up the monitor with that. if not, try any other graphics card in your rig. You may have a dodgy one.

EDIT: Try what alot of people recommend and try and boot with just one stick of ram installed.

Also, may not solve the problem but if you've had different ram installed on the motherboard before, make sure the timings have been adjusted for this new ram. But i guess this won't be able to be changed if you can't get picture

__________________

OCN Headphones Club - Because perfect hair is Over-Rated

Fly~Boi

There is no problem with the monitor and I have tried to use with 1 ram only on the mobo. However, I dont have a spare graphic card. And still blank, black screen and somehow the mobo doesnt beep when i start the pc (sign of succesfull install).

let me explain wat exactly happened. I tried to update my BIOS live online using @BIOS to F8a from F3. From there my problem started, first it went to the blue screen of death like other ppl calling it, then after restart the computer again it went all black. Each time I start the computer I cant see nothing but black.

ed102r

If you where updating your BIOS and it was interrupted, it may be corrupted. In which case your motherboard is now a large paperweight.

If you aren't hearing any beeps, then I'm pretty sure that its not posting correctly if at all. But do you have a POST speaker? Did the motherboard beep when the computer was working properly? If it did and now its not then its not posting because the Bios is corrupted.

Unfortunately there is no cure for a corrupted Bios except RMA it or take it back to store and exchange it.

Fly~Boi

Everytime when I start my computer normally it always makes a beep noise which tells me that everything is working normally. But this time i dont hear the beep anymore.

My BIOS wasn't interrupted during the live update but after the update.