|
![]() |
Overclock.net - Overclocking.net > AMD > AMD - General > AMD Build Logs | |
amd build
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | |||||||||||
|
New to Overclock.net
|
hi, what do you think about that build:
__________________Western Digital - WD 320GB SerialATAII, 7200, 8192K Kingston - Kingston HyperX 2x2 GB 1066MHz DDR2 Non-ECC CL5 (5-5-5-15) DIMM KHX8500D2/2G Gigabyte - GA-MA770-UD3 - s.AM2+/ AM2, AMD 770 + SB700, 4xDDR2 1200 /1066/800/667 MHz, 1 x PCI Express x16, 4 x PCI Express x1, 2 x PCI, HD Audio, Gigabit LAN, IEEE1394, 1 x IDE, 6 x SATA 3Gb/s (SATA RAID 0, RAID 1 and RAID 0+1), 8 x USB 2.0/1.1 ports, ATX Sapphire HD 4890 1GB GDDR5 PCI-E DUAL DVI-I / TVO,Dual Slot Fan Cooler; 16M x 32 GDDR5 256-bit; 850MHz / 975MHz (3900Mhz), FULL AMD Phenom II X2 550 Dual Core (3.1GHz, 1MB L2/6MB L3, 80W, AM3) Black Edition i have good power supply.... i will not overclock nothing
Last edited by eurotrade07 : 07-26-09 at 02:03 PM |
|||||||||||
|
|
|
|
|
#2 (permalink) | |||||||||||
|
New to Overclock.net
|
great build. go with the 770t-ud3p board and unclock that 550be
__________________
|
|||||||||||
|
|
|
|
|
#3 (permalink) | |||||||||||||
|
Overclocker in Training
|
yep looks like a good build to me
|
|||||||||||||
|
|
|
|
|
#4 (permalink) | ||||||||||||
|
4.0ghz
![]() |
Looks solid. You can look into better RAM, then again, I'm picky
__________________
Diamond Lapping Service!! PM if your interested Personnel HD3300 Benchmark!!! Arctic Cooling MX-2 > OCZ Freeze Source
|
||||||||||||
|
|
|
|
#5 (permalink) | |||||||||||
|
New to Overclock.net
|
ok. the unlocking.....is it necesery?
__________________
|
|||||||||||
|
|
|
|
|
#6 (permalink) | ||||||||||||||
|
4.0 GHz
![]() |
Quote:
???? Why not overclock you can easily get 3.6Ghz. Overclock means better performance.
__________________
4.0Ghz Club![]() http://valid.canardpc.com/show_oc.php?id=756990 http://i435.photobucket.com/albums/qq77/AAdeath/oc2.png http://www.overclock.net/gallery/dat...medium/186.jpg http://www.overclock.net/gallery/dat...medium/267.jpg Chicago Cubbies... a century of stink and still rolling!
|
||||||||||||||
|
|
|
|
|
#7 (permalink) | |||||||||||
|
New to Overclock.net
|
no i dont want to, i said it once
__________________im not tuning fan
|
|||||||||||
|
|
|
|
|
#8 (permalink) | |||||||||||||
|
4.0 GHz
![]() |
No advise from me..... Why join an "OVERCLOCKING FORUM".. I will say it once.
__________________
4.0Ghz Club![]() http://valid.canardpc.com/show_oc.php?id=756990 http://i435.photobucket.com/albums/qq77/AAdeath/oc2.png http://www.overclock.net/gallery/dat...medium/186.jpg http://www.overclock.net/gallery/dat...medium/267.jpg Chicago Cubbies... a century of stink and still rolling!
|
|||||||||||||
|
|
|
|
|
#9 (permalink) | ||||||||||||
|
Linux Lobbyist
![]() |
One thing you might want to think about is that the memory won't run above 800 without manually adjusting the settings (voltage and speed...1066 wants to run at 2.1v and 800 runs at 1.8v by default)... also what i noticed was that running the memory at 800 and tightening the timings to the 4s instead of 5s (or just buying the cas4 800 memory) is actually faster than the cas5 1066 memory. The memory speed thing is a function of the chipset... hope this helps....
|
||||||||||||
|
|
|
|
|
#10 (permalink) | |||||||||||
|
New to Overclock.net
|
i will leave completely stock all the parts
__________________comment the config
|
|||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|