♠♠Spade♠♠

You can remove the top 240m fan and put the rad there it should fit i got mine mounted there with the push and pull setup going bout to add a 2nd rad just for the gpu's

__________________



I am 0% addicted to Counterstrike. What about you?

Martkilu

I think I might just try this

Thanks for the suggestions guys


That radbox majig will be mine if they make a 360mm version and I dislike temps of push/pull 2

__________________

♠♠Spade♠♠

i here ya on the temp but it depnds. Im pushing 37-40c with a push and pull plus the not so got paste i used..When i order my Heatkiller and some good paste then ill tell you bout the temps

__________________



I am 0% addicted to Counterstrike. What about you?

Martkilu

I'm going to try your method tonight if it isn't where I want it I'll ghetto rig it (to cheap to buy a radbox, 12 bucks for a modded $3 tupperware )

For the loop I'm thinking


pump > cpu > rad > res > pump

or would

pump > rad > cpu > res >pump

be better? Or a dif config

__________________

Syrillian

Generally I run: Res > Pump > Radiator > CPU

You could swap the Rad/CPU if it helps in the physical configuration of the loop.

__________________
WIP: Scarab
Custom Cases:
Silentium, Halcyon, Indigo, Gemini, Prometheus, Anvil
Case Mods:
Liquid Chameleon, VF1000 LAN box

Semper Fidelis

Martkilu

Thankies, I'll try this and report back tonight (school starts in 30 and I'll have pics up)

__________________