Turtlewrench

Well I have to say it is running great, thanks to all the the support from the OCN.

What I did:

Re arrayed my RAID0, re installed the OS, re installed all my drivers, down clocked my RAM to 1066, and manually set the timings to spec 7-7-6-18-t1 DRAM Volt at 1.85. At stock vcore the CPU is stable at 3.6(set multi to 18). My ambient temp it 20 to 21~, and with my fans set to med o fan controller highest temp was 47~. That was after 2 hours of prime 95torture testing.

Arma2 runs smoother the with the same set up except I was using the UD4P MG with DDR2 800 over cocked to 1066 with 5-5-5-24 t1, and my old 550 at 3.8 in dual

So again to Tot, Volt, el gappo and the others who provided with all their help. I think it was a RAM/software issues, stopped getting the AT display driver recovery message.

Thanks to all again

__________________

5800 Ownerz Club

PHENOM II X2 550BE OC CLUB

Voltage_Drop

Anytime! Glad you have finally resolved your issue. Is this site great or what!

__________________
Hardware Hacker

Turtlewrench

I have searched many sites and I use this one because I feel it is the best. Dont get me wrong the others are good sites but there are members here that go beyond the call to provide help to its members.

Again thanks to all, and I now try to help when ever I can with others.

ALL HAIL THE OCN!!!!!

__________________

5800 Ownerz Club

PHENOM II X2 550BE OC CLUB