Originally Posted by waqasr

Yea it REALLY does have to be tightened so much that its scary..when its really tight and you think i wont tighten anymore...tighten it abit more..im running my sandy naked and its soo tight that like burns..my H-plate also has a slight curve in it..but im thinking of doing a reseat because im not so happy with my temps..although my load is just 2c above idle...it should be lower.

Originally Posted by OJX

Drill a hole in the top side of the case, preferably near the front
Make sure you sandpaper the hole, and then put some U rubber over it to avoid sharp edges. Put some grease around the newly drilled hole, and then screw your computer, screw it hard. Maybe install some UV lights and turn em up to indicate that your computer is also excited.

Originally Posted by OJX

Drill a hole in the top side of the case, preferably near the front
Make sure you sandpaper the hole, and then put some U rubber over it to avoid sharp edges. Put some grease around the newly drilled hole, and then screw your computer, screw it hard. Maybe install some UV lights and turn em up to indicate that your computer is also excited.

Originally Posted by biatchi

I wasn't talking to gonx i meant for the guy above that wanted to do it with his c2d

Originally Posted by gonX

OK tried tightening it a bit more... temps are now:

38c/37c (non-core and core respectively)

Originally Posted by RuSo

sry ......it must be my brain cooking in this heat......

nice thats more like it.....

Originally Posted by OJX

Drill a hole in the top side of the case, preferably near the front
Make sure you sandpaper the hole, and then put some U rubber over it to avoid sharp edges. Put some grease around the newly drilled hole, and then screw your computer, screw it hard. Maybe install some UV lights and turn em up to indicate that your computer is also excited.

Originally Posted by gonX

1c drop? lol

Originally Posted by RuSo

from IHS to no IHS? i thought 5c or something, whats your ambient?
im running 42c/45 idle ATM 48/50c on the core load @ 1.58v 27c ambient....so it sounded pretty good to me..

Originally Posted by OJX

Drill a hole in the top side of the case, preferably near the front
Make sure you sandpaper the hole, and then put some U rubber over it to avoid sharp edges. Put some grease around the newly drilled hole, and then screw your computer, screw it hard. Maybe install some UV lights and turn em up to indicate that your computer is also excited.

Originally Posted by whe3ls

you have inspired me gonx now my celly has no ihs

Originally Posted by OJX

Drill a hole in the top side of the case, preferably near the front
Make sure you sandpaper the hole, and then put some U rubber over it to avoid sharp edges. Put some grease around the newly drilled hole, and then screw your computer, screw it hard. Maybe install some UV lights and turn em up to indicate that your computer is also excited.