ecotec

I will see where I can get on the 15 multiplier. Ever since I read about the importance of sub timings I have been obsessed with seeing how far I can push this chip on the least amount of Vcore. If my memory serves me correctly, anything above 210 x 15 required massive amounts of vcore.

jack16

Oh man, you almost have the same setup I have.
Can you adjust your VCore above 1.3v with the M2N SLI Deluxe?
It was hell for me to get more voltage.

If you need help, let me know.

__________________

Black Edition Club
Unknown Folding Team

ecotec

With this board I can up the Vcore all the way to 1.56 or something near there. I believe my current bios is 1302...just released a few days ago. Have you checked ASUS website to see if there is a new bios for your board. (sorry if someone has already suggested that). I saw you have your BE up to 3.3Ghz. What is your vcore to achieve that. Plus have you played with the RAM subtimings at all?

jack16

I am unstable at 3.3, but am able to reach 3.26-ish. (Rounded up is 3.3)
And yeah, ofcourse I've checked for BIOS updates. I was hoping the release on Nov 21 would allow a high voltage, but nada.

My board would not let me go any higher than 1.3v. I had to use a pinmod to get my voltage up to 1.55. And now, I can't adjust my voltage in the BIOS because of my mod. So until ASUS fixes this with a new release I'm stuck with 1.55V until I decide to remove my voltage mod.

EDIT: Nope, I havn't touched my ram settings. Again, my board will not let me go past 1.95v for my memory voltage.

__________________

Black Edition Club
Unknown Folding Team

SpcCdr

Congrats & Kudos Guys (n Gals):
TigerDirect has gone from offering the 5000+ BE with free game (Call of Juarez- NOT Call of Duty4) for under a C-note.
and as part of two different MoBo/CPU Combos
MSI K9N SLI Platinum & BE
Abit KN9 SLI AM2 & BE
They've sold so many 5000+ Blackies
They are now out of stock and aren't offering it in any configuration.
http://www.tigerdirect.com/applicati...-5000B%20PROMO
LOLZ and KIKs
OCN FTW

__________________
Not directed at Me Just Some Good Advice from CD!
CyberDruid; "..leave the trolling, swearing, baiting, flaming and emo-ing to MySpace or some other more suitable Forum like the NAMBLA chatrooms."

1st Shuttle Launch '08- Atlantis Lift off! Pictures; Endeavour Night Launch Watch Real Spacetech on NASA TV
The Bartender Paradox; "We've hardly begun looking for life on Mars.. less than a square kilometer so far...
This is like looking at your bathroom sink and declaring all of North America to be white, hard, and occasionally wet."

AMDKnight

The 5000 Blacks are kinda picky about memory configs. But there is definitley a wall @ 3.3Ghz. To get above that really requires a major bump in Vcore. I could actually boot in at 16X above 3.4Ghz. But it took over 1.5V. I could run most benchmarks. But Orthos or Prime95 would crash almost right away. The temps jumps over 20C from idle on stability test.

This thing could hit 3.5 on a good water system. But I still believe that the Brisbanes DO NOT like the higher voltages. 1.5 on air is probably max for this CPU. And even then, I don't think that it would last very long. I see tooo many people on forums claming low temps. But they are reading the core values which are about 10-15C low because of a bad digital thermal. When your core reads under ambient temps you should get the idea. I expect to see post in the future from people cooking these things because they are naive about temps.

I would love to see something stable @ 3.4 on this baby! But I don't think it's possible without a good water or chiller setup. Prove me wrong people! I want to hear more.

MRoFlare

hi again! gotta update my new settings which I really like!
250x14 @ 3500mhz
250x4 @ 1000FSB!
DDR1000mhz @ 5-5-5-15-24-2t (testing stability for 5-5-5-12-2t 24atm)
3dMark06= 12025 stock 8800GT SSC

Its been tough getting anything stable over 3550mhz. Been getting alot of BSOD.

stanrc

congrats!

__________________

Ramrod 1.5 + AMD Phenom 9950 BE = Ramrod 2.0! Coming soon...

Crimsonite

Newer verison of Everest Ultimate shows the correct clock~

__________________
GeIL 2x1GB Esoteria: 834 3-3-3-7 2-22 1T @ 2.3v
GeIL 2x1GB Esoteria: 1088 4-4-4-13 4-23 2T @ 2.35v
GeIL 4x1GB Esoteria: 1100 5-5-5-15 5-25 2T @ 2.35v

jack16

Nice! Could ya post some CPU-Z shots?

__________________

Black Edition Club
Unknown Folding Team