|
|
|
#1 (permalink) | |||||||||
|
Fear the Wombat
![]() |
Show off your Black Editions here!
__________________
Last edited by The Duke : 01-19-08 at 03:23 PM |
|||||||||
|
|
|
|
#2 (permalink) | |||||||||
|
Fear the Wombat
![]() |
i'll be posting cpuz screen shots tonight. right now i'm at 3.25, 250x13. sadly my mb won't let me use a higher multiplier but i'm still looking for a way around that.
so far my idle temps seem to be around 20 or so but my load got quite hot peaking at 60 occasionally. hopefully that will calm down once the AS5 settles in better.
__________________
Last edited by stanrc : 10-30-07 at 12:01 PM |
|||||||||
|
|
|
|
#3 (permalink) | ||||||||
|
AMD Overclocker
![]() |
well, so far i don't have much . 200x15.5 3.1Ghz, 3dmark06 50xx, 05 105xx with HD2600XT gddr3 version
|
||||||||
|
|
|
|
|
#4 (permalink) | |||||||||||||
|
AMD Overclocker
|
So far I can only get 3.2GHz (16x 200), and a very unstable 3.3GHz (16.5x 200).
I blame my cheap mobo. Stupid thing capped my voltage to 1.3v. Now, thanks to a pinmod, I'm stuck with 1.55v and a semi-hot CPU. But the Processor is the ****. For anyone looking for more info on OCing the 5000+ BE check out this review: AMD's Athlon 64 X2 5000+ Black Edition | Tom's Hardware
Last edited by jack16 : 11-23-07 at 05:23 AM |
|||||||||||||
|
|
|
|
|
#5 (permalink) | |||||||||||||
|
AMD Overclocker
|
Does you mobo cap your multiplier or is it just unstable?
|
|||||||||||||
|
|
|
|
|
#6 (permalink) | |||||||||
|
Fear the Wombat
![]() |
well the most current bios at the time didn't let me change the multi above 13, but then they put out an update that let me get higher.
__________________
|
|||||||||
|
|
|
|
#7 (permalink) | |||||||||||||
|
AMD Overclocker
|
I would have been really pissed to see my unlocked mutiplier locked at 13.
I think mine goes up to 26x, but that will never be possible.
|
|||||||||||||
|
|
|
|
|
#8 (permalink) | ||||||||||
|
Fear the Wombat
![]() |
Quote:
__________________
|
||||||||||
|
|
|
|
#9 (permalink) | |||||||||||||
|
AMD Overclocker
|
I wish ASUS/Award was that easy to pry updates out of.
|
|||||||||||||
|
|
|
|
|
#10 (permalink) | ||||||||||||
|
AMD Overclocker
|
Heres what I finally settled on. It's 24hr Prime stable. The voltage is actually 1.45 in bios. But all programs read it at 1.49V. I tried upping the voltage and HTT and it runs stable but the temps start climbing like crazy after running both cores maxed in Prime95. It currently idles at 30C and a load of 55C. I don't want to push it much more because it is impossible to get true temp readings of the cores. Plus I don't think these Brisbanes like the higher voltage.
__________________
Last edited by AMDKnight : 11-23-07 at 09:17 AM |
||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|