craig198

is my vcore too high for this OC?

and I turned up my CPU~NBv to 1.25. anything else in that section should I be worried about? should I up all of those voltages(ie NB~SB) as my OC gets higher?

jaclipse

No, your fine

vwgti

That voltage is acceptable with water cooling. Very nice oc you have there, good job!!

craig198

still not very stable. what would you suggest I do to stabilize? temps are still very good at 34C idle and a jump to 41~43C under full load.


(wow if you guys had responded any faster I think the internet would'v come to a halt lol. thanks for the heads up and fast replys.

any suggestion about the northbridge southbridge and cpu to them voltages lol(I talk weird sometimes)

vwgti

Id suggest tinkering with your ram sub timings some. But because I have no experience with ddr2 ram timings I cannot chime in some ideas to try. Heres a free bump for you to try and get some suggestions rolling. Only other thing I can think of is to leave your ht multi at x5 as Ive heard am2 systems do better with a ht between 1200 and 1400, but only in certain cases. Good luck with your oc venture.

craig198

thanks I will try that. and I like your pic...wazzzzzzzzuuuuuuuuupp

Spitphire

What core is the chip?

__________________
I overclock like Flava Flav in a watch factory!

Crysis Benchmark DX9 High Settings No AA 1680x1050 -35.4FPS

rusky1

makes me want to bring my chip (same core) to 3.0 on air

craig198

why does it make you wanna do that?

I have so much more room to OC with my temps being so mild. I think my memory is the limiting factor. its decent memory I have so I dont see why it should be limiting.

im not getting the sarcasm.

rusky1

no sarcasm, i do want to do that. Maybe the emotes made it look sarcastic, srry.