|
|
|
11-09-08
|
#171 (permalink) | |||||||||||
|
New to Overclock.net
|
Very hot!(?)..Hello all first of all I have a good cooling system (thermaltake duorb) But I'm getting very hot @ 3.1GHz .Second I can't rich more than 3.1Ghz stable and I need some help from someone how cans.How you rich this point?Also i have the 140w cpu.
__________________Thanks in Advance!
|
|||||||||||
|
|
|
11-10-08
|
#172 (permalink) | |||||||||||||
|
AMD Overclocker
Join Date: Nov 2008
Location: Where the army tells me t
Posts: 16
Rep: 1
 Unique Rep: 1
Trader Rating: 0
|
Right now I'm at 3.15 prime stable for 8+ hours. temps are running at 51° C ATM. 1.2875V, 14x multi, 225 HT Clock, going to push it up in abit.
__________________@tablet what is your voltages, are you using AMD Overdrive. If you are post that with the system info and possibly status monitor. Maybe you can tweak the HT Clock and drop multi depending on what you're running, also what memory are you using? Happy OCing!
|
|||||||||||||
|
|
|
|
11-10-08
|
#173 (permalink) | |||||||||||||
|
4.0 GHz
 
|
Just wondering, what kind of CPU scores is everyone getting in 3dmark06?
I'm getting ~4300 at 3.3 GHz, and it seems a little on the low side.
__________________
Project: Slow Chemicals
|
|||||||||||||
|
|
|
|
11-11-08
|
#174 (permalink) | |||||||||||||
|
AMD Overclocker
 
|
Hey guys I need some advice. I've got my 9850 up to 2.8 and its semi stable. Sometimes I can run Prime95 torture test for hours plus, and then other times it'll BSOD on me 10mins after boot up. Im trying to get mine up to 3.0 - 3.2 mark but if i try to change the multi in the BIOS, vista wont even load. Also tried pretty much every voltage between 1.3 -1.4. Any advice on what I can do next? or do you think I just ended up with a lemon?
__________________
|
|||||||||||||
|
|
|
|
11-11-08
|
#175 (permalink) | |||||||||||||
|
AMD Overclocker
|
Any multi higher than 14.5 will not allow vista to load. Trying to change it in AOD, it will run for about 5 mins then BSOD with the "A clock interrupt was not recieved...secondary processor" error message.
__________________
|
|||||||||||||
|
|
|
|
11-12-08
|
#176 (permalink) | ||||||||||
|
Audiophile
|
Running at 3.3ghz now. Multiplyer at 13x, bus at 255, and running 34 degrees in mid load.
__________________This is air cooling, not liquid. I am on a old bios and with new one i am hoping to get a bit higher.
|
||||||||||
|
|
|
|
11-16-08
|
#177 (permalink) | ||||||||||
|
Folding Vixen
 
|
Ok guys, I'm kinda a overclocking virgin here so be gentle
__________________ Here's what's on my desk: LIAN LI Lancool PC-K7B Aluminum/ SECC ATX Mid Tower Computer Case http://www.newegg.com/Product/Produc...82E16811112154 XIGMATEK HDT-S1283 120mm Rifle CPU Cooler http://www.newegg.com/Product/Produc...82E16835233003 AMD Phenom 9950 2.6GHz Socket AM2+ 125W Quad-Core BE Processor http://www.newegg.com/Product/Produc...82E16819103291 ASUS EN9600GT TOP/HTDI/512M GeForce 9600 GT 512MB 256-bit GDDR3 PCI Express 2.0 x16 HDCP Ready SLI Supported http://www.newegg.com/Product/Produc...2E16814121242R GIGABYTE GA-MA790GP-DS4H AM2+/AM2 AMD 790GX HDMI ATX AMD Motherboard http://www.newegg.com/Product/Produc...2E16813128352R G.SKILL 4GB (2 x 2GB) 240-Pin DDR2 SDRAM DDR2 1066 (PC2 8500) Dual Channel Kit Desktop Memory http://www.newegg.com/Product/Produc...82E16820231166 I got it to 2.7ghz (200x13.5) at 1.38v, but sadly it crashes after 5 minutes using OCCT. Can anyone help me out?
|
||||||||||
|
|
|
11-16-08
|
#178 (permalink) | |||||||||||||
|
4.0 GHz
|
^
Have you tried using ACC in your BIOS? Bump it to 2% on each core, and you shold be able to get better results.
__________________
Project: Slow Chemicals
|
|||||||||||||
|
|
|
|
11-16-08
|
#179 (permalink) | ||||||||||
|
Folding Vixen
|
How would I change the ACC? I don't see anything like that in the BIOS.
__________________
|
||||||||||
|
|
|
|
11-16-08
|
#180 (permalink) | ||||||||||||||
|
PC Gamer
|
Quote:
|
||||||||||||||
|
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
