|
|
|
07-05-09
|
#1001 (permalink) | |||||||||||||
|
Overclocker in Training
|
zevind - What are your system specs?
__________________
|
|||||||||||||
|
|
|
07-05-09
|
#1002 (permalink) |
|
New to Overclock.net
|
Re:heat issues
Athlon64 X2 7750 Black Edition
Arctic Cool CPU Cooler (Dunno model, but it's about 50% bigger than stock HSF 2x2GB G.Skill PC-1066 DDR2 ASRock N61P-S Mainboard XFX GTS-250 1GB OC edition Antec "EarthPower" 80+ 500w Power Supply (12v1 22A, 12v2 20A) 2x WD 74GB Raptors in RAID 0 SiL 2-port RAID card, PCIe 1x Lite-On DL DVD Burner Let me know if I forgot anything |
|
|
|
|
07-06-09
|
#1003 (permalink) | |||||||||||||
|
Overclocker in Training
|
What kind of case? Have good air flow? Do you have good contact between your cooler and cpu? Did you remove the film on the bottom of your cooler? Have a good thermal compound? Just a thought, your psu might not be enough for your system.
__________________
Last edited by mdcrt : 07-06-09 at 04:50 PM |
|||||||||||||
|
|
|
|
07-06-09
|
#1004 (permalink) |
|
New to Overclock.net
|
Re:heat issues
Good case, an old Lan-Li made of all steel. 2 front fans, 1 blow-hole, 1 rear. I removed the thermal crap that came on the new HSF I just bought for it an used Arctic Silver 5.
Think I'm just gonna try a new MB. Got my eye on a decent Gigabyte board for $110 that should do the trick. |
|
|
|
|
07-07-09
|
#1005 (permalink) | |||||||||||||
|
Overclocker in Training
|
Good luck with the new mobo.
__________________
|
|||||||||||||
|
|
|
|
07-07-09
|
#1006 (permalink) | |||||||||||||
|
Overclocker in Training
|
Got it to 3.25.
__________________ Idle temps and load temps are not bad.
|
|||||||||||||
|
|
|
|
08-05-09
|
#1007 (permalink) | |||||||||||||
|
PC Gamer
|
 my Pc boot 1/5 time whit this overlock , My board suck i cant raise voltage so ... Hyper TX2 Whit 2 Yate 92mm Fan
__________________
AMDIs My Choice WINDOWSis an Obligation...for Gamming
Last edited by Kenji Acso : 08-05-09 at 07:28 PM Reason: ... |
|||||||||||||
|
|
|
|
08-23-09
|
#1008 (permalink) | |||||||||||||
|
New to Overclock.net
|
I finally got 3Ghz stable!!! I know, it doesnt seem like much but for those of us stuck with the gimpy batches its awesome. I think my mobo has something to do with it, while I really like the Gigabyte GA-MA770UD3 I dont think it is a great overclocker, just like it couldnt handle 8gb of 1066 and have to run at 800(though I think that might be a processor issue). None the less, I stopped with all the little tweaks and such and just pushed the voltage to 1.45 and the multiplier to 15 and we are there amazing the simplicity when you stop messing with everything and just power through. Thanks for all the help everyone!
|
|||||||||||||
|
|
|
|
08-24-09
|
#1009 (permalink) | ||||||||||||
|
First Time Build
 
|
well i got a small update on my oc, im up on 3.2 right now, i primed last night, of corse didnt save a screeny
 but any doubt ill repeat the prime run, this is a temp setup, i will post back when i get this cpu on air cooling with my mugen 2 and back on the msi dka 790gx platinum with a 4850 1gb (long story short, my backup system will be up this week  hopefully)till then ill stick with this : 
__________________
|
||||||||||||
|
|
|
08-24-09
|
#1010 (permalink) | |||||||||||||
|
Windows Wrangler
 |
3105MHz
207x15 RAM: 414MHz (DDR2-828) 1.30V (stock) HT Link: 1800MHz Mobo: ASRock A780GMH/128M Chipset: AMD 780G/SB710 ACC Enabled Cooling: stock AMD fan http://valid.canardpc.com/show_oc.php?id=620951
__________________
92% of teens have moved on to rap. If you are part of the 8% who still listen to real music, copy and paste this. Foxconn A7DA/A7DA-S Owners' Club | The Samsung Owners Club | Hardware-Independent Linux OS Cloning - Part 1, 2 | Create a MS-DOS Bootable USB Stick
|
|||||||||||||
|
|
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
: : The Corsair H50 Hydro Series Club : : 
