AMD Athlon X2 7750 BE OC Club - Page 3 - Overclock.net

nist7 · 01-28-09

Quote:

Originally Posted by Dopamin3

About 30 idle and 47 load give or take a few.

Nice, that's a very cool temp under load.

I'll be seeing how good the stock HSF up, hopefully it'll stay around 60C under load on a considerable OC (hoping for 3.2 but will be happy with 3.0) But we'll see

TripleC · 01-28-09

update in a while
gtg eat first lol

kairi_zeroblade · 01-29-09

latest with another motherboard

wiidoggy49120 · 01-29-09

Update me bus is 210mhz and muti.is 15 volt is 1.60

STL_OverClocker · 01-29-09

Can't wait til tomorrow to come cause my stock case psu was too weak for my overclock!! I will hit 3.7+ very,very soon, lol.
And nice remake of the club Trip!

:edit: Oh, Trip at that time my memory sticks were ddr2 800, Ocz Fatal1ty Edition.

cyron · 01-29-09

ok little bit of help here lol. i have been trying to OC my 7750 with no luck. i had it at 3.1, but as soon as it got into windows it froze

. That was at 14.5 x multi and 205 bus i think... so i tryed it with the bus at 200 and the multi at 15. that loaded and seemed stable untill i ran orthos... about a hour in i got a quick blue screen then a restart. that was at +50mv. so i upped the vcore +100mv and im trying that. oh and i JUST put in some new OCZ Platinum XTC REV.2 PC2-6400 2GB 2X1GB DDR2-800 CL4-4-4-15. i set the mem voltage at just over 1.9 and all the timings right. is there anything you guys can suggest.?

ohh and max temp at +50mv vcore was 45-46
im testing it now with +100 vcore and so far its been 47.

STL_OverClocker · 01-30-09

Quote:

Originally Posted by cyron

ok little bit of help here lol. i have been trying to OC my 7750 with no luck. i had it at 3.1, but as soon as it got into windows it froze

. That was at 14.5 x multi and 205 bus i think... so i tryed it with the bus at 200 and the multi at 15. that loaded and seemed stable untill i ran orthos... about a hour in i got a quick blue screen then a restart. that was at +50mv. so i upped the vcore +100mv and im trying that. oh and i JUST put in some new OCZ Platinum XTC REV.2 PC2-6400 2GB 2X1GB DDR2-800 CL4-4-4-15. i set the mem voltage at just over 1.9 and all the timings right. is there anything you guys can suggest.?

ohh and max temp at +50mv vcore was 45-46
im testing it now with +100 vcore and so far its been 47.

Try taking out your 8800 and see if it boots.
If it boots then it is your psu.

cyron · 01-30-09

ok 2 hours of orthos and it passed everything.

vcore 46
mb 28

ill try and play some left 4 dead and see how it goes, thanks for the help

ill see if i can get it faster tomorrow

flak4 · 01-30-09

3.3GHz 207x16 1.45V

Can't bring that voltage down at all. Chipset definitely holding me back.

Nenkitsune · 01-30-09

I'll bet I can get a better gaming and overall stable overclock if I get a new power supply.

My rig is 4 hours OCCT stable at 3.3ghz with 1.47v (maybe even lower than that) but as soon as I try to game, it'll freeze on me. hell, at 3.2ghz it takes 1.48-1.5v to get it gaming stable, even though it can be OCCT stable for hours and hours with 1.42v+ I was running OCCT and had it make a graph of my 12v rail. starts at 12.03 while stressing my CPU only, as soon as I fire up Furmark v1.6 the 12v rail fluctuates from 11.9 down to 11.84v probably NOT a good thing. I'll bet this powersupply is being taxed big time during gaming.

I just used a little powersupply calculator with my current setup, but for the graphics card I selected a 9800GT (and GTX to see the difference) since I overclocked my 9600GT WAY WAY WAY past the stock settings, and I'm at the bleeding limit of what my PSU can handle...

Yep, monday becomes New PSU day

		Overclock.net - Overclocking.net > AMD > AMD CPUs
AMD Athlon X2 7750 BE OC Club

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)