AMD Athlon X2 7750 BE OC Club - Page 6 - Overclock.net

Nenkitsune · 01-31-09

http://valid.canardpc.com/show_oc.php?id=496586

well just for the hell of it I went ahead and got a 3.4ghz validation (totally not stable, i'm only pushing 1.48v to it right now, it takes 1.55v to get it stable enough to boot into windows, but it still isn't benchmark stable. It may be because this PSU is taxed pretty badly)

hellr4isEr · 01-31-09

Quote:

Originally Posted by bucdan

wow...3.4 on stock voltages? what setting of acc areu usin? how are your temps so low? its on stock cooling, unless you live in canada or something, but chicago gives those temps?

Dunno what "acc setting" ur talkin about.. im gettin these temps surprisingly.. i jus switched to that new IC 7 Carat Thermal Compound.. it works wonders.. dropped 7C on my idle.. havent checked load yet.. also im using a thermaltake ruby orb cpu cooler..

videoman5 · 01-31-09

Is 1.6 a safe 24/7 voltage?

hellr4isEr · 01-31-09

i believe max 1.5 volts for 24/7 usage.. but that could jus be me..

Nenkitsune · 01-31-09

1.5-1.55v depending on temps, but for me, my limit is 1.5v

I can't wait to get new thermal compound though. I'll bet these temps will drop BIG TIME.

I'm using THREE YEAR OLD arctic silver 5.

yep, it's been sitting around for THREE YEARS hahaha.
it's definitely seperated some, and is much thicker than it was 3 years ago, so I'm sure a lot of the particles have separated.

oh well, we'll see what happens next week when I get new compound lmao

and if this setting is stable, it's going to be my current setting. (Only because reference overclocks impress me more.)

oh, also, because my HT and NB frequency are at 1984 lmao

http://valid.canardpc.com/show_oc.php?id=496621

13x248 3.224ghz@1.488v

let's see if it's stable

well those settings were a total bust.

now I'm at 16.5x207 for 3415mhz@1.52v
idle at 29c only because the side is open.

STL_OverClocker · 01-31-09

Quote:

Originally Posted by hellr4isEr

Dunno what "acc setting" ur talkin about.. im gettin these temps surprisingly.. i jus switched to that new IC 7 Carat Thermal Compound.. it works wonders.. dropped 7C on my idle.. havent checked load yet.. also im using a thermaltake ruby orb cpu cooler..

Hell!!! How the hell you get 3.4 on stock voltage?
Is it tested Stable (At least 10-12 hrs?)
I have the same MB as you and I needed 1.45v

You don't know what ACC is? LOL.. I didn't either at one point of time (thanks Nenkitsune)
So if you don't know about ACC then it is disabled if you did not turn it on yourself in the bios.
I'm going to take a look at this now..

:edit: And last, did you upgrade the bios to the 11/11/08 one or did you stay with the one that came with the MB?
That is the best one I used "tro me" for the 3.6 then upgraded to the latest and then "@#$%^"!!
I think the updated one is screwed up, I'm keep getting higher and lower cpu volts everytime I restart the computer now????

Nenkitsune · 01-31-09

seriously, I don't think I can even get my system to POST at 3.4 with stock voltage, let alone boot windows!

I re-applied my thermal compound. last time I put my heatsink on, I kinked it and it lifted (so it probably had lots of bubbles)

we'll see how it does now.

3.2ghz 1.47v

STL_OverClocker · 01-31-09

Quote:

Originally Posted by Nenkitsune

seriously, I don't think I can even get my system to POST at 3.4 with stock voltage, let alone boot windows!

I re-applied my thermal compound. last time I put my heatsink on, I kinked it and it lifted (so it probably had lots of bubbles)

we'll see how it does now.

3.2ghz 1.47v

That is weird that you need 1.47 for 3.2 and your mb is better than mine?? lol
And Trip thinks I have the GX3!!! Nope the GX A2+ hehehe...

Nenkitsune · 01-31-09

it's my power supply. it takes 1.47-1.5 to get it stable enough to game, even though it's prime stable down to something like 1.4v

hell, i'm running 3.3ghz@ 1.456 right now to see what temps it hits in OCCT

and for some reason, I kept getting Code 1 in OCCT after 2 minutes with 1.47v at 3.2ghz

though, it could be because my NB is overclocked to 2400mhz lmao

yep, it's ALWAYS just past the 2.5 minute mark that it crashes. guess I'll drop my NB frequency since it's obviously not a CPU crash

1.408v 3.3ghz load temps at 46c, looks like case ambient is 23c. everest has a Motherboard temperature sensor, i believe this to be the SB sensor, as the SB creates no heat it seems. NB temp is at 48-50c. Or maybe this board has its own ambient sensor?

guess that was too low. trying 1.42ish now

3.3ghz 1.42v stable so far for 1 hour. case ambient appears to be at 25c load temp at 46c with heatsink fan set to LOW and the two top exhaust fans on my P182 set to Medium. with all 3 set to low, load temp hits 50c+ so it seems that on low the fans don't exhaust enough air and a hotspot forms.

kairi_zeroblade · 01-31-09

@hi guys..

		Overclock.net - Overclocking.net > AMD > AMD CPUs
AMD Athlon X2 7750 BE OC Club

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)