|
|
|
03-22-09
|
#81 (permalink) | |||||||||||||
|
New to Overclock.net
 
|
Prime Stable and folds almost 24/7 along with my GPU
- Clock Speed -> 3655 Mhz - Bus xMulti -> 215 x 17 - RAM Speed -> 1176 Mhz - Vcore -> 1.5V - HT Link -> 1720 - Motherboard -> Gigabyte MA790XT-UD4P - Chipset -> AMD 790X - CPU Cooling -> Zerotherm BTF80 http://valid.canardpc.com/show_oc.php?id=532477
|
|||||||||||||
|
|
|
03-22-09
|
#82 (permalink) | |||||||||||||
|
First Time Build
|
I've hit another snag in my first OC. I used Overdrive to increase the multi to 16.5 but I don't know how to make my system keep those settings. I clicked apply, saved it as a profile, checked 'Apply settings when System Starts'; but when I reboot it shows 2.8 GHz in BIOS and in Overdrive. I'm assuming I'm doing something wrong, any help would be appreciated.
|
|||||||||||||
|
|
|
|
03-22-09
|
#83 (permalink) | |||||||||||||
|
AMD Overclocker
|
OP hasn't been on to update the thread/list... ^.o
|
|||||||||||||
|
|
|
|
03-22-09
|
#84 (permalink) | |||||||||||
|
New to Overclock.net
|
My 720 crashed during OCCT at 3.6 Ghz. I'm not sure if this is the physical limit of my CPU, the max temp was 41C before the system rebooted. The system passed at 3.5Ghz though, which I'm still satisfied with since this cpu is very snappy either way. Anyways I'm OCing through BIOS and all I did was the following:
__________________Core clock: Auto = 200 Mhz Multiplier: 18X VCore: 1.42V NB Core something: Auto NB Volt: Auto SB Volt: Auto RAM Volt: 2.1V Everything else: Auto Any advice?
|
|||||||||||
|
|
|
|
03-22-09
|
#85 (permalink) | |||||||||||||
|
AMD Overclocker
|
seems like you're @ 1.425 atm, try 1.450V's and you should be able to hit that 3.6.
|
|||||||||||||
|
|
|
|
03-22-09
|
#86 (permalink) | |||||||||||
|
New to Overclock.net
|
- Clock Speed : 3442Mhz
__________________- Bus xMulti : 215 - RAM Speed : 800Mhz - Vcore : 1.5v - HT Link : 800 - Motherboard : Gigabyte GA-MA790GP-DS4H - Chipset : 790GX - CPU Cooling : A.C. Freezer 64 Pro CPU-Z : http://img403.imageshack.us/img403/4167/cpu.jpg Finally I can finish a OCCT test but I want to get it to 3.5 Im just not sure how without it becoming unstable.
|
|||||||||||
|
|
|
|
03-22-09
|
#87 (permalink) | |||||||||||||
|
AMD Overclocker
|
@Moch, youre using pretty high volts for just 3.44, damn..maybe you should check if it'll go at lower volts.. i do 3.7@ 1.475, but then again, everychip is different.
|
|||||||||||||
|
|
|
|
03-22-09
|
#88 (permalink) | |||||||||||
|
New to Overclock.net
|
I was at a higher OC about 3.65 but it kept failing OCCT. I kept downgrading untill I passed which 3.4, If I up the multi or the fbs it will either fail to boot/post or fail OCCT
__________________
|
|||||||||||
|
|
|
|
03-22-09
|
#89 (permalink) | |||||||||||||
|
AMD Overclocker
|
list your rig on a sig, and we'll see what we can do for ya
|
|||||||||||||
|
|
|
|
03-22-09
|
#90 (permalink) | |||||||||||
|
New to Overclock.net
|
K I think I got it down, not sure how to make it nice like your guys tho XD
__________________*edit* there got it, thanks btw
Last edited by mochtroid : 03-22-09 at 11:53 PM |
|||||||||||
|
|
|
 |
| Tags |
| 720, amd, black edition, overclock, phenom, phenom ii, trike |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
ATI 4830 Club 
