*Phenom II X4 9x5 OC Thread*

[FlanK3r]

I can boot max at 3980 MHz (this was at 3900 and enxt step in Phenomtweaker), more i must set in AOD or PhenommrTweaker. But NB frequency is from BIOS and all voltages. Only higher steps at CPU freqency i must set in software (my records 4260 etc...)

[maniac4life]

I have a "noob" question for you guys.

I was wondering that, what would be a good NB Frequenzy for my cpu?

For now I have these settings:
CPU Frequency 3815.0 MHz
Multiplier x 17.5
Bus Speed 218.0 MHz
NB Frequency 2398.0 MHz

My RAM are 3 x Kingston 1GB 1066MHz DDR3

Should I upgrade my RAM before trying to OC it?

[skugpezz]

Originally Posted by maniac4life

I have a "noob" question for you guys.

I was wondering that, what would be a good NB Frequenzy for my cpu?

For now I have these settings:
CPU Frequency 3815.0 MHz
Multiplier x 17.5
Bus Speed 218.0 MHz
NB Frequency 2398.0 MHz

My RAM are 3 x Kingston 1GB 1066MHz DDR3

Should I upgrade my RAM before trying to OC it?

well I am now running3.8ghz cpu with 2.8ghz NB STABLE after long trial and errors

[Rubashka]

Can someone throw some suggestions in my direction please? i seem to be stuck here Here is what i have now stable on prime95 for 3hrs.

CPU 3638mhz @ vcore 1.42v
multi x17
fsb 214

NB 2354mhz @ 1.3v
CPU NB VID @ 1.275v
HT @ 2140mhz

Memory is running on 1426mhz @ 1.7v stock timings 7-7-7-20

Now i have not touched the ram at all as i am not familiar with timing teaks..
I did try different combos of raising my cpu vcore and nbvid voltates, i can boot into windows fine at even 3.706mhz... but i can't get it stable.

Last night (@ 3.706mhz) after 4 hrs of prime 2 cores failed with SUMOUT error. This morning it keeps crashing on me randomly ( 5-15mins, 1 hour).

I have a feeling i need some RAM tweaking?

Any help, suggestions at this point guys? Thanks.

[superbruce]

Originally Posted by FlanK3r

First time with my board and chip i broked 3000 MHz at northbridge,hmmm, i see now good run with superpi, tomorow try it...

Sir,
did I miss your SuperPi run with 3000 NB? Just curios.

Thanx.

[Slappa]

965 Incoming guys.

I'll show you guys what it can do

[superbruce]

Originally Posted by Slappa

965 Incoming guys.

I'll show you guys what it can do

"Test results" incoming, or "being shipped" incoming? Either way can't wait. Thanks again for sharing knowledge and guidance Yoda.

bruce.

[Slappa]

Originally Posted by superbruce

"Test results" incoming, or "being shipped" incoming? Either way can't wait. Thanks again for sharing knowledge and guidance Yoda.

bruce.

No problem. I love to help.

And I guess you'll see won't you

[bringonblink]

slappa you tease!

[FlanK3r]

uffff, im enjoy it ...Dont forgot Cinebench and wprime benchmark , have u too second OS, x64 ? I today fighting with Cinebench R10, but Cinebench is winner to time :-/ (one crash, some restarts and know temps are not this problem. NB maybe too not, i set only 2400 MHz first)

superbruce: il try it, but i have fear, it will crash...