pow3rtr1p

Here's mine so far:

CPU: Phenom II 920
Stepping: CACVC AC 0849BPCW
Clock: 3.36 GHz (14 x 240)
Voltage: 1.392V
HT : 2160
NB: 2160
cooling: Push-Pull Xiggy 1283

I have the stock BIOS, so I can't help there, sorry. I need to find out how to unlink my RAM and perhaps clock down the HT and NB, if that's possible.

__________________

oneluvballer21

I have no problems with that. Adding that to the databse will just push it off of most people's screens, but so be it, they can scroll I'll scour the thread and add any of that info that has already been posted, and if you haven't posted it (any of you), we're adding it to the list... so spit it up!!

__________________
Feed the addiction: never stop upgrading your computer....

Phenom II steppings and max OC database

pow3rtr1p

Question:

Which is better for stable OCs, Ganged or Unganged memory? All I can find is performance seems to be better in multi-threaded stuff when it's unganged.

__________________

oneluvballer21

Ok, sorry, but the database updates are gonna be held off for the rest of the night... my new system pieces just arrived (finally! AT 8PM!!). FallenFaux, it looks like I'm in your boat... I got a CACVC AC 0849APMW, which should have very similar silicon to your chip. No complaints, seeing as you currently have the highest OC on air. Plus I'll be running this under water, so I got my hopes up! I'll post a few "happy new father" pics in a few...

EDIT: here's we go...

I'll start with the LG 26" monitor...


Then the EVO ONE RAM (4x 2gb)


The new Caviar SE16 640mb HDD's

The Phenom II 940


The Foxconn Destroyer and accessories




(Well supplied for tri-SLI, but its x16/x8/x8...)

The workbench table (includes 1.5" standoffs)

And the extra NB heatpipe extension




Ok, so now I gotta shower and meet the gf.... I'll play with this stuff tomorrow or later tonight...

__________________
Feed the addiction: never stop upgrading your computer....

Phenom II steppings and max OC database

robbo2

I have settled with the overclock in my sig. I don't know the stepping sorry I never bothered to look an I really don't want to pull it out hahaha. This is a great chip.

__________________

oneluvballer21

Is it because you don't want to push the CPU voltage higher, or does it do you no good...? And can you post a screenie of your CPU-Z with the memory tab open, and include your stock memory timings at DDR2-800...? I think some of us might need to adjust the timings to get higher clocks.

__________________
Feed the addiction: never stop upgrading your computer....

Phenom II steppings and max OC database

robbo2

I can get it higher mate i've had it at 3.7 just not stable. I don't want to push my voltage higher not cause i'm afraid to just my temps are starting to get up there in this Australian summer! lol I'm hoping to get some water cooling soon though. Also I don't know what my NB voltage is so I can't raise that to try an stabilize higher clocks.
Changing my tras from 15 to 18 got me this to stabilize. But i'm running my ram at 1066 not 800.

Attached Thumbnails

 

__________________

Gen

Increase your multi on your NB and HT-Link, you should be able to hit 2000-2200Mhz easy at stock voltage.

Edit: Give them a 10 for multi, that will be 2100Mhz and should be doable...

Another Edit: I may try for 3.6 one more time, but because the voltage require last time, I doubt I'll be able to keep it, my temps starts getting scary at 1.475V.

__________________

We Are The Red Tide

robbo2

Thanks for the tip gen! I tried that put it to 10 cpuz was reading it at 1890 still so i upped it to 11 an still reading it at 1890. Any ideas man?

__________________

Gen

you must have the NB > HT-Link, thats the only thing I can think of. My 9850 did some of the same but I never really dug into it, I should have it up and going again soon then I can play with it, just need memory and power supply...

__________________

We Are The Red Tide