|
|
|
06-23-09
|
#1 (permalink) | ||||||||||||
|
Overclocker in Training
 
|
Instant Shutdown
Ok, so i've had my CPU overclocked to 3.1 for a while now at 1.45v, i never ran a stress test because i figured that's enough volts for that not so high overclock. I've never had crashes at all.
So i run Prime95 small fft's and get an instant shutdown no warning, no BSOD just shutdown and didnt turn back on. So i hit the power button went into bios and bumped the voltage to 1.5 (think that's the max for these chips). I have my fsb at 206 and multiplier is 15x. So i boot up into windows and run prime95 small fft's again and get the same thing. I'd think 1.5v would be wayyy more than i need for that OC. I'm thinking it may be my RAM since i have all 4 dimm's full, and my voltage's on my ram will not change from 1.9 no matter what. I have the most updated bios out their for this board, but it is an old board. Maybe its a problem with the board that cant be fixed. I saw sli ready memory that have anything to do with this. Other things i thought of were NB and SB volts. I do run SLI. But idk about anything else? So please help  edit: Temps are 22C idle lol and load ive seen them hit 55C and no higher
__________________
99.9999999% of the world listens to everything else. put this into your sig if you still listen to trance
Last edited by Bizong : 06-23-09 at 04:32 PM |
||||||||||||
|
|
|
06-23-09
|
#2 (permalink) | ||||||||||||
|
Overclocker
Join Date: Apr 2009
Location: Atlantic City, New Jersey
Posts: 1,188
Rep: 60
 Unique Rep: 56
Trader Rating: 1
|
do individual test for each component
u are just upping the vcore for no reason http://www.overclock.net/amd-general...ocket-am2.html
__________________
don't tell me u guys really thought sc2 was going to be released in Q3/4 of 2009... BNIB Phenom II 920 for sale $145
|
||||||||||||
|
|
|
06-23-09
|
#3 (permalink) | |||||||||||
|
AMD Overclocker
 
|
Yea it could be many things, voltage is not always the answer.
__________________Do you have all your memory timings and voltage set manually?
|
|||||||||||
|
|
|
|
06-23-09
|
#4 (permalink) | ||||||||||||
|
Overclocker in Training
|
yeah i am kinda new ill read some more. Yes my timings and voltage are manually set but like i said the ram voltage doesnt go up or down : /
__________________
99.9999999% of the world listens to everything else. put this into your sig if you still listen to trance
|
||||||||||||
|
|
|
|
06-23-09
|
#5 (permalink) | |||||||||||||
|
Don't Fail Too Hard..
 
|
I've found when my comp just instantly shut down, my memory was unstable or failing. I would run memtest to see if you're memory is stable.
__________________
|
|||||||||||||
|
|
|
06-23-09
|
#6 (permalink) | ||||||||||||
|
Overclocker in Training
|
how exactly do i get memtest on a flash drive anyone know?
__________________
99.9999999% of the world listens to everything else. put this into your sig if you still listen to trance
|
||||||||||||
|
|
|
|
06-26-09
|
#7 (permalink) | ||||||||||||
|
Overclocker in Training
|
anyone please
__________________
99.9999999% of the world listens to everything else. put this into your sig if you still listen to trance
|
||||||||||||
|
|
|
|
06-26-09
|
#8 (permalink) | ||||||||||||
|
Overclocker
Join Date: Apr 2009
Location: Atlantic City, New Jersey
Posts: 1,188
Rep: 60
Unique Rep: 56
Trader Rating: 1
|
time for u to upgrade
buy my 920! =D
__________________
don't tell me u guys really thought sc2 was going to be released in Q3/4 of 2009... BNIB Phenom II 920 for sale $145
|
||||||||||||
|
|
|
|
06-26-09
|
#9 (permalink) | ||||||||||||||
|
4.0 GHz
 
Join Date: Dec 2008
Location: Ghettoshiels in Scotland
Posts: 4,921
Rep: 687
 Unique Rep: 494
Trader Rating: 11
|
Check if anything's shorting your mobo out.
I was puzzled when this happened to me for a bit.
__________________
Quote:
The more you love music, the more music you love. ~aaronman Wattage = Amperage * Voltage
Amperage = Wattage/Voltage Voltage = Wattage/Amperage
|
||||||||||||||
|
|
|
|
06-26-09
|
#10 (permalink) | ||||||||||||||
|
PC Gamer
|
download memtest and then burn it to a dvd with imgburn
thats what i did
__________________
Quote:
Quote:
|
||||||||||||||
|
|
 |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
