SubstancenUnknown

Okay here is how i have mine set up maybe this will help a little and i to am in win7 x64

__________________
PhII 940 @ 4ghz
3DMark 06

SubstancenUnknown

If there is anything els you would like me to show you let me know?

__________________
PhII 940 @ 4ghz
3DMark 06

BADFASTBUSA

I have tried just about everything i know how to do (which really isn't a whole heck of a lot LOL) and just can't get this thing stable through more than 5-10 minutes of occt at all at 3.8ghz... Its weird, 3.7 is stable all dang day with occt prime and 3dmark06 and anything else i throw at it, but that little bump from 3.7 to 3.8 has proven unattainable for some reason... Im sure i could get it stable, just don't know how because my temps never touch 50*C and it blue screens.

__________________
No bugs in my machine, i use raid, raid0 that is MUHAHAHA
Ranked 7th in AMD 3DMARK06 TOP 40

SubstancenUnknown

I know this wont fix it but try the same setting in XP and see because in win7 im taped out at 3.8 but in XP im able to get almost 4 stable...Then that way you will know that its the OS holding you back not the hardware...

__________________
PhII 940 @ 4ghz
3DMark 06

Dopamin3

Try decreasing your HT Link / and or NB speed for stability. As far as max voltage, I personally wouldn't go over 1.5v on air but if your temps are good I wouldn't run more than 1.55v for 24/7. I believe any higher than that will degrade the chip's life more than it is worth.

BADFASTBUSA

any suggestions what i should decrease the HT and NB speeds to?

__________________
No bugs in my machine, i use raid, raid0 that is MUHAHAHA
Ranked 7th in AMD 3DMARK06 TOP 40

SubstancenUnknown

Do you have everything on auto except for the FSB, CPU volts, Ram timings, Multy, Ram volts?

Edit: You could also try and raising the Bus speed and dropping the multy but keep in mind that in doing that it will increase your ram so you will have to drop that down if you raise it to high or loosen timings....

__________________
PhII 940 @ 4ghz
3DMark 06

BADFASTBUSA

I have tried it both of these ways with no luck, what now? BTW, i appreciate all of your time and help.

+rep to everyone that helps me get this thing flying!

Attached Thumbnails

   

__________________
No bugs in my machine, i use raid, raid0 that is MUHAHAHA
Ranked 7th in AMD 3DMARK06 TOP 40

SubstancenUnknown

okay disable CPU tweak, and Auto Xpress Put the following on auto: Processor-NB voltage, CPU-NB HT link, Processor NB Frequency Multy.. And leave everything els the same and let me know how that works for you....

__________________
PhII 940 @ 4ghz
3DMark 06

BADFASTBUSA

I'll try that real quick and get right back to you after testing.

__________________
No bugs in my machine, i use raid, raid0 that is MUHAHAHA
Ranked 7th in AMD 3DMARK06 TOP 40