Help OC'ing the old x2 4400+ - Page 3 - Overclock.net

Adamantin · 07-05-09

Quote:

Originally Posted by The Duke

Looking good

You may have to work the chip sets voltage a bit if necessary to get more out of it.
BTW, on a 939, the 1/2 CPU multiplier can be a bit of a pain.
1. the 1/2 is not applied to the memory, only the CPU because the memory controller uses only whole integers .
2. Many use to claim it inhibits the OC (unconfirmed IMHO)

thanks id rep you but theres no such buton

now i lowered the voltage a bit ( bios says 1.35 cpuz 1.32

) i'll bump some more... what do you mean chip sets voltage how high to set it ?

Mason92 · 07-05-09

Keep in mind you have ways to go with this chip. Could reach 3ghz i bet if you tweek enough. Remember you could push as much as 1.55v on the vcore with that chip

hangemhi · 07-05-09

Quote:

Originally Posted by Mason92

Keep in mind you have ways to go with this chip. Could reach 3ghz i bet if you tweek enough. Remember you could push as much as 1.55v on the vcore with that chip

You should also post your system specs in under "User CP" on the top of the page. For OCing, you need adequate cooling. You should get your cpu to 2.9 at least.

Adamantin · 07-06-09

Quote:

Originally Posted by hangemhi

You should also post your system specs in under "User CP" on the top of the page. For OCing, you need adequate cooling. You should get your cpu to 2.9 at least.

done im at 2.8GHz now @1.39V

was stable in 3dmark06 and gaming will try OCCT later

		Overclock.net - Overclocking.net > AMD > AMD CPUs
Help OC'ing the old x2 4400+

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)