TheSandman

if the bios freatures remain you will have basic voltage and FSB adjustment, and dram control no multi control and and your HT settings should be there but limited to just HT speed, ive had that board

__________________

Bass00

After looking at CPU-Z my Motherboard Model is MCP61SM-GM which would still be the same thing? Either way I'll see what I can do.

Bass00

I didn't check for Voltage but I have access to...
FSB - 16, 32, 64, 128, 256 MB
HT Speed 1-5X / Auto
HT Width 8 8 and 16 16 and Auto
DRAM Configuration

What should I change in here since, like I said before, I have no knowledge when it comes to the BIOS.

I changed my HT Speed to 4X to see what would happen...only HT Link was affected, so what does HT Link do?
Core Speed - 2410.8 MHz
Multiplier - X 12.0
Bus Speed - 200.9 MHz
HT Link - 803.6 MHz

redhat_ownage

try 250 htt
set the ram divider to 166
and the htt link to 4X

__________________
Brother: "what happens when you run out of IP's?"
Me:*stare*"... you use another subnet..." lawl rofl lol nub cake lmao
92% of teens have moved on to rap. If you are part of the 8% who still listen to real music, copy and paste this.
http://valid.canardpc.com/show_oc.php?id=766986 <---my attempt at ddr600 with a 1gb stick

Bass00

Okay, I'll try that and post what I get.