|
|
|
#1 (permalink) | |||||||||||
|
Retired Section Director
![]() |
Link to Discussion Thread
Purpose The key purpose for this thread is to capture ALL stable overclocked AMD systems for Overclock.net members, stock speeds are also welcomed. ![]() There needs to be a reasonable amount of information collected in order for this to have any real value, so please try and submit all information requested but at least the minimum as specified below. Stable Stability has many views and interpretations depending on the individual, so for here there will be offered various levels of stability and you can select which one you best wish to use. Stability Rating OCNS1: "Suicide" CPUZ stable, Super Pi Mod 1.4 1M, 2M 4M - enough to get to Windows and grab a screenshot. OCNS2: "Benchmark and Game" PCMark05, 3DMark06, Super Pi Mod 1.4 8M, 16M OCNS3: "Solid" OCCT stability test 30min, Super Pi 32m, Prime 2hrs (CPU Small FFT) OCNS4: "Rock-Solid" 8+ hours of Prime 95 (Large FFT) OCNS5: "Unbreakable" 12+ hours of Prime 95 (Large FFT) Notes: 1. Prime must be Mersenne version 24.14 or later - version to be diplayed as confirmation 2. Dual Core Systems MUST show Prime and Super Pi results running on both cores. Entries and Information Required (Also known as the Rules - these are also subject to change as this thread grows and develops) One entry per CPU per motherboard, as an OC moves up that entry will be updated on the list. If the CPU moves to a different MB then that will be considered a new system. Data Collection, the information to be supplied is as per the list below, use this as a template and complete all where possible within your post. Supporting Screen shots must be supplied to validate the claims and should include CPUz Main & Memory Tabs and any other screen information that will help others see how you achieved your OC. Items in Blue are a MUST have, any post that does not have these items will be deleted. Your co-operation will be much appreciated ![]() Model Type Core Stepping (Stepping, Date, Code as taken from the CPU IHS - 2nd line) Date Code Rev E Mhz Gain Vcore HT x Multi Divider Mobo (Asus, Abit, Asrock, DFI, MSI, ... etc) BIOS Cooling (Air / H20 / TEC / Phase) Stable We are still working on how to best present this information and this is likely to be in a table of some shape and will likely change over time. But for now it will be good to start the collection and for those who have already posted in the various threads around here, it will be a simple matter of adding a post here with the information above and a link to your screen shots in the other threads. Thanks and have fun
Last edited by The Duke : 07-11-08 at 01:00 AM Reason: Update THE RULES.... |
|||||||||||
|
|
|
#2 (permalink) | |||||||||||
|
Retired Section Director
![]() |
Updated to Post 58
Screen Shots attached in two Parts.
Last edited by ncsa : 05-27-06 at 06:07 PM |
|||||||||||
|
|
|
#3 (permalink) | |||||||||||
|
Retired Section Director
![]() |
Model 3000+
__________________Type Venice Core 0.09 Stepping LBBLE Date 0517 Code GP0W Rev E E3 Mhz 3000 Gain 1200 Vcore 1.776 HT x Multi 375 x 8 Divider 3:4 Mobo DFI BIOS 623-3 Cooling Phase Stable Pi32M ![]() CPUz : 375x8
Last edited by ncsa : 12-09-05 at 06:31 AM |
|||||||||||
|
|
|
#4 (permalink) | ||||||||||||
|
Dusty Bake Activate
![]() |
Model: 3000+
Type: Venice Core: 90nm Stepping: YBBLE Date: 05/24 Code: EPCW Rev: DH-E3 Mhz: 2614 Gain: 814 Mhz Vcore: 1.525 HT x Multi: 290 x 9 Divider: 1.5 Mobo: Gigabyte K8NXP-SLI BIOS: F10s Cooling: ThermalTake Silent Tower with 2 Fans (Air) Stable: 20hr+ Prime95 (SP2004) Second Run: (Differences shown) Mhz: 2583 Gain: 783 Mhz HT x Multi: 287 x 9 Divider: 1.33 Bios: F11 Stable: 9hr+ Prime95 (SP2004) http://valid.x86-secret.com/show_oc.php?id=70289
__________________
CPU/NB Loop: HK 3.0 :: Bloodrage NB :: GTX360 :: H1011's :: 655v :: TYGON 3606 7/16" Q6600 G0 4.1GHz on water Core i7 C0 4GHz on water 955 BE 4GHz on water Core i7 D0 4.4GHz on air
Last edited by TheCh3F : 02-08-06 at 08:18 PM |
||||||||||||
|
|
|
#5 (permalink) | ||||||||
|
Overclocker
![]() |
Model 3200+
Type Venice Core 0.09 Stepping LBBLE Date 05/21 Code GPMW Rev DH-E3 Mhz 2670 Gain 670 Vcore 1.552 HT x Multi 267x10 Divider 1:1 Mobo ASUS A8N-SLI Premium BIOS: 1009 Cooling: Big Typhoon Stable: SP2004 (unknown), Super Pi 32(unknown), OCCT(unkown) CPUz Validation: http://valid.x86-secret.com/show_oc?id=62933 Ongoing-- Well I installed my Big Typhoon and temps are doing great! Only about 5-7'c better than before but my stock was doing quite well for stock. Im at 2.67 right now 1.55v and Im at 38'c load. I tried 2.7 but it seems as if thats out of my reach unless I do a volt mod which I want to do but am hesitant because I am not very good at soldering. After I prime for a few hours Im gonna up it to 2.68. Maybe once the AS5 is cured I can get to 2.69 *crosses fingers*.
Last edited by tweako_420 : 01-10-06 at 05:16 AM |
||||||||
|
|
|
|
#6 (permalink) | ||||||||
|
New to Overclock.net
|
Model 3700 +
__________________Type San Diego Core 0.09 Stepping 1 Date Unknown Code Unknown Rev SH-E4 Mhz 2749.89 Gain 549.89 Vcore 1.4 HT x Multi 250x11 Divider 1:1 Mobo ASUS A8N-Premium BIOS: 1009 Cooling: Stock Stable: SP2004, Super Pi 32 Temps: cpu: idle 36c load 51/52 system: idle 34c load 40c CPUz Validation: http://valid.x86-secret.com/show_oc?id=56585 Could get this to go higher with 3rd party cooler im sure, but im happy for now. Not bad for a 165 pound chip. :
Last edited by livewireuk : 12-13-05 at 08:35 PM |
||||||||
|
|
|
|
#7 (permalink) | ||||||||
|
Console Gamer
![]() |
Model 3000+
Type Venice Core 0.09 Stepping LBBLE Date 0520 Code CPMW Rev E E3 Mhz 2844 Gain 1044 Vcore 1.584 HT x Multi 316 x 9 Divider 2:3 Mobo Chaintech VNF4 Ultra BIOS (Not sure) Cooling Big Typhoon Stable Prime95 9hrs +
__________________
My Heatware
|
||||||||
|
|
|
|
#8 (permalink) | ||||||||
|
AMD Overclocker
|
http://img142.imageshack.us/my.php?i...dletemp7lo.jpg
Model 3700+ Type San Diego Core 0.09 Stepping KAB2E Date 0532 Code XPAW Rev SH E4 Mhz 2981 Gain 781 Vcore 1.6 HT x Multi 271 x 11 Divider CPU/14 Mobo DFI NF4 Ultra-D BIOS 704-2bt Cooling Thermalright XP-90C with Vantec 92mm Tornado Stable Prime95 13hrs +
__________________
Sieg Zeon!
Last edited by Zeonic_Warrior : 12-16-05 at 03:35 AM |
||||||||
|
|
|
|
#9 (permalink) | |||||||||||||
|
I Eat Cases Mmmmm.
![]() |
Model Opteron 170
Type Toledo Core 90mn Stepping CCBWE Date 0543 Code Will check next time i remove water block Rev E E6 Mhz 2600 working it up slowly Gain 600 Vcore 1.392 HT x Multi 260x10 Divider 1:1 Mobo DFI BIOS Will check Cooling Dual rad Water Stable Triple SP2004 + 100 loops of 3d mark 05 ( all at the same time ) CPU-Z http://valid.x86-secret.com/show_oc?id=57726
__________________
Proud member of the Official All-Canadian Club!!!![]() All shall fall if they don't fold for overclock.net ![]() MY MOD LOGS TT Armor Logs - Project Work Log: My Armor Reborn - Project Work Log: The Throne for my Armor TT Mozart Logs - Project Work Log: Pete's Monstrous Mozart - Progect Work Log: Pete's Monstrous Mozart Overhaul
|
|||||||||||||
|
|
|
#10 (permalink) | |||||||||||||
|
AMD Overclocker
|
Model: Athlon XP-SFF 2600+ AxDL2600DLV4D (CPUZ reads XP-M erroneously)
Type: Barton Core: 0.13 Stepping: AQXFA Date: 0416 Code: WPMW Rev: A2 Mhz: 2401 (previously 2315) Gain: 501 (previously 415) Vcore: 1.73 (previously 1.63 HT x Multi: 218 x 11 (previously 220 x 10.5) Divider: 1:1 Mobo: Asus A7N8X-E Deluxe BIOS: Award/Phoenix 1013 Cooling: Thermaltake Extreme Volcano 12 Stable: Super Pi (see screens) CPU-Z Validation: http://valid.x86-secret.com/show_oc?id=58613 I just found out that my cpu is not a mobile chip.. after looking about the OPN on my proc i found that it was designated a SFF chip, runs at 1.5vcore. None of the cpuid software out there properly recognizes this chip so i was kinda surprised to find that it was actually multi locked, my next project is to get it unlocked to see how far i can push it. Updated
__________________
Unorthodox, custom, whatever... as long as it's one of a kind!
Last edited by ShadowDragon : 12-23-05 at 01:44 AM |
|||||||||||||
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|