Overclock.net - Overclocking.net
     
 
Home Gallery Reviews Blogs Register Today's Posts Mark Forums Read Members List


Go Back   Overclock.net - Overclocking.net > AMD > AMD - General

Reply
LinkBack Thread Tools
Old 12-16-08   #10591 (permalink)
New to Overclock.net
 
amd nvidia

Join Date: Dec 2008
Posts: 44

Rep: 0 azim Unknown
Unique Rep: 0
Trader Rating: 0
Default

Quote:
Originally Posted by thlnk3r View Post
Azim, are you still receiving the same error message as shown in Screenshot #1? The data on the drive can easily be retrieved as long as the drive isn't permanently damaged. I usually use an external enclosure, a LiveCD and rstudio to recover the data. In your case it might be easiest to slave the Samsung drive in another computer and grab the data that way. If it's applications you want then it's probably not going to work. Typically documents, pictures, movies ect are the easiest to grab.

Let us know

Good luck
Ok, here is little upgrade, I only got now one Error message: "DISC BOOT FAILURE, INSERT SYSTEM DISC AND PRESS ENTER"
So its getting little better, So what do u recommend me to do now?
__________________
System: My System
CPU
AMD Athlon 64 3200+
Motherboard
Asus A8V
Memory
1.5 GB ddr 400mhz
Graphics Card
Asus EN8600GT SILENT 512Mb
Hard Drive
Samsung S166 160Gb SataII
Sound Card
Windows XP PRO SP3
Power Supply
Antec NeoPower HE High Efficiency 430W
Case
Antec
CPU cooling
Zalman CNPS7000B-Cu
azim is offline   Reply With Quote
Old 12-16-08   #10592 (permalink)
Tech Support
 
thlnk3r's Avatar
 
ati

Join Date: Jun 2007
Location: Triangulum Galaxy M33
Posts: 10,827

Trader Rating: 10
Default

Quote:
Originally Posted by azim View Post
Ok, here is little upgrade, I only got now one Error message: "DISC BOOT FAILURE, INSERT SYSTEM DISC AND PRESS ENTER"
So its getting little better, So what do u recommend me to do now?
Azim, in your BIOS go to the "Boot" menu. That option is located up top next to "Exit". Check your "Boot Device Priority" and change the 1st Boot Device to "Hard Disk". Also make sure under, "Hard Disk Drives" (in the Boot menu) that your drive is listed first and not a removable device or a Bootable Add-in Card. I have your manual right in front of me so the settings I am viewing should be pretty close.

Let us know what happens

Good luck
__________________
AMD Overclocking Guides · Terms of Service · My CM690
Socket 939 Appreciation Club and Knowledgebase

Quote:
Originally Posted by txtmstrjoe View Post
"Steppings merely indicate possible outcomes due to the law of averages being in your favor."

System: Messier 33
CPU
AMD Opteron 146 @ 2.6Ghz 1.41volts CAB2E (Lapped)
Motherboard
Gigabyte GA-K8N SLI-Pro
Memory
GSkill F1-3200PHU2-2GBNS 2x1GB 217Mhz 2.5-3-3-6 2T
Graphics Card
ATI X1950XT
Hard Drive
Western Digital WD3200AAJS
Sound Card
Razer Barracuda AC-1
Power Supply
Corsair VX550
Case
Coolermaster CM690
CPU cooling
Thermalright SI-128 (Lapped)
GPU cooling
Thermalright V2 (Lapped)
OS
Windows XP Professional
Monitor
Acer AL2216W
thlnk3r is offline Overclocked Account   Reply With Quote
Old 12-16-08   #10593 (permalink)
PC Gamer
 
HothBase's Avatar
 
amd ati

Join Date: Sep 2008
Location: Scandinavia, Europe
Posts: 351

Rep: 9 HothBase Unknown
Unique Rep: 8
Trader Rating: 0
Default

Alright joe, thanks.
Don't think I'll bother with S&M, I see no real reason to go through such a thorough stability check when I'm not really that far from stock and it never crashes on me.
I couldn't afford to replace my system at the moment if it breaks on me, and I wouldn't want to either, at least not before the Phenom II.
I think I would rather be a little "unstable" than rock solid as a dead brick
__________________
$ Progress towards AM3: 55% $
The rig below is my "Aeris"-build. I currently expect it to be done by Jan/Feb 2010.
These specs are estimates and will be modified if I manage to find a better solution in the same price range.

My current main rig? "Archon [Skt939 AGP]" in my profile.

System: Q1 '10 [AM3 HD5k] Aeris (55%)
CPU
Phenom II X3 720
Motherboard
Gigabyte GA-MA790XT-UD4P
Memory
OCZ Gold 2x2GB 1600MHz CL8
Graphics Card
XFX 5850
Hard Drive
WD Caviar Black 500GB
Sound Card
X-Fi XtremeMusic
Power Supply
Corsair CMPSU-650TX
Case
CM Dominator 690
CPU cooling
OCZ Vendetta 2 w/ MX-2
GPU cooling
Stock
OS
Windows 7 x64
Monitor
BenQ X900 19" (1280x1024) Plans for Samsung 2443BW
HothBase is offline   Reply With Quote
Old 12-16-08   #10594 (permalink)
Need a New Protocol
 
Hueristic's Avatar
 
Join Date: Jul 2008
Location: Bottom_Of_A_Bottle
Posts: 7,676

Rep: 316 Hueristic is a proven memberHueristic is a proven memberHueristic is a proven memberHueristic is a proven member
Unique Rep: 213
Folding Team Rank: 63
Trader Rating: 1
Default

Quote:
Originally Posted by HothBase View Post
I think I would rather be a little "unstable" than rock solid as a dead brick
__________________
I seldom argue my advice, It's free take it or leave it. READ this thread before starting your first build!!!
ALWAYS power up a Mobo Before installing it! Consider Less than helpful posts as Free Bumps.
ĦĦĦʍʇɟ qn1ɔ uoıʇɐıɔǝɹddɐ 939 ʇǝʞɔos ǝɥʇ:
OCN's October Foldathon Prizes Thread Retro Rulez
This goes without saying but
1. If you can't afford to lose it don't mod or OC it.
2. At least read the OP before commenting.

Semper Fi
Overclock.net - 2009 Chimp Challenge Champions 2 Million+ Folding at Home points
Hueristic is online now I fold for Overclock.net Overclocked Account Hueristic's Gallery   Reply With Quote
Old 12-16-08   #10595 (permalink)
New to Overclock.net
 
amd nvidia

Join Date: Dec 2008
Posts: 44

Rep: 0 azim Unknown
Unique Rep: 0
Trader Rating: 0
Default

Quote:
Originally Posted by thlnk3r View Post
Azim, in your BIOS go to the "Boot" menu. That option is located up top next to "Exit". Check your "Boot Device Priority" and change the 1st Boot Device to "Hard Disk". Also make sure under, "Hard Disk Drives" (in the Boot menu) that your drive is listed first and not a removable device or a Bootable Add-in Card. I have your manual right in front of me so the settings I am viewing should be pretty close.

Let us know what happens

Good luck
Nothing happens. It's same like before
__________________
System: My System
CPU
AMD Athlon 64 3200+
Motherboard
Asus A8V
Memory
1.5 GB ddr 400mhz
Graphics Card
Asus EN8600GT SILENT 512Mb
Hard Drive
Samsung S166 160Gb SataII
Sound Card
Windows XP PRO SP3
Power Supply
Antec NeoPower HE High Efficiency 430W
Case
Antec
CPU cooling
Zalman CNPS7000B-Cu
azim is offline   Reply With Quote
Old 12-16-08   #10596 (permalink)
Need a New Protocol
 
Hueristic's Avatar
 
Join Date: Jul 2008
Location: Bottom_Of_A_Bottle
Posts: 7,676

Rep: 316 Hueristic is a proven memberHueristic is a proven memberHueristic is a proven memberHueristic is a proven member
Unique Rep: 213
Folding Team Rank: 63
Trader Rating: 1
Default

Quote:
Originally Posted by azim View Post
Nothing happens. It's same like before
click
__________________
I seldom argue my advice, It's free take it or leave it. READ this thread before starting your first build!!!
ALWAYS power up a Mobo Before installing it! Consider Less than helpful posts as Free Bumps.
ĦĦĦʍʇɟ qn1ɔ uoıʇɐıɔǝɹddɐ 939 ʇǝʞɔos ǝɥʇ:
OCN's October Foldathon Prizes Thread Retro Rulez
This goes without saying but
1. If you can't afford to lose it don't mod or OC it.
2. At least read the OP before commenting.

Semper Fi
Overclock.net - 2009 Chimp Challenge Champions 2 Million+ Folding at Home points
Hueristic is online now I fold for Overclock.net Overclocked Account Hueristic's Gallery   Reply With Quote
Old 12-16-08   #10597 (permalink)
Tech Support
 
thlnk3r's Avatar
 
ati

Join Date: Jun 2007
Location: Triangulum Galaxy M33
Posts: 10,827

Trader Rating: 10
Default

Quote:
Originally Posted by azim View Post
Ok, here is little upgrade, I only got now one Error message: "DISC BOOT FAILURE, INSERT SYSTEM DISC AND PRESS ENTER"
So its getting little better, So what do u recommend me to do now?
Azim, the next step would be to attempt a repair on the MBR (master boot record). After POST the BIOS looks for the MBR which basically tells the hard drive what to load ect. The MBR holds the drives primary partition table. If the MBR becomes corrupt or damaged then you'll run into problems.

You can try a few things. First give the "fixmbr" command a try. This was suggesed by Blitz in a earlier post (thanks Blitz). Here are a few more details about this: http://pcsupport.about.com/od/termsf/p/fixmbr.htm.

You could also try replacing some files. Check out these quick instrutions: http://www.indiastudychannel.com/res...ING-Files.aspx. I'm not saying this procedure will fix the problem but it's worth a shot.

Good luck
__________________
AMD Overclocking Guides · Terms of Service · My CM690
Socket 939 Appreciation Club and Knowledgebase

Quote:
Originally Posted by txtmstrjoe View Post
"Steppings merely indicate possible outcomes due to the law of averages being in your favor."

System: Messier 33
CPU
AMD Opteron 146 @ 2.6Ghz 1.41volts CAB2E (Lapped)
Motherboard
Gigabyte GA-K8N SLI-Pro
Memory
GSkill F1-3200PHU2-2GBNS 2x1GB 217Mhz 2.5-3-3-6 2T
Graphics Card
ATI X1950XT
Hard Drive
Western Digital WD3200AAJS
Sound Card
Razer Barracuda AC-1
Power Supply
Corsair VX550
Case
Coolermaster CM690
CPU cooling
Thermalright SI-128 (Lapped)
GPU cooling
Thermalright V2 (Lapped)
OS
Windows XP Professional
Monitor
Acer AL2216W
thlnk3r is offline Overclocked Account   Reply With Quote
Old 12-16-08   #10598 (permalink)
New to Overclock.net
 
amd nvidia

Join Date: Dec 2008
Posts: 44

Rep: 0 azim Unknown
Unique Rep: 0
Trader Rating: 0
Default

Quote:
Originally Posted by thlnk3r View Post
Azim, the next step would be to attempt a repair on the MBR (master boot record). After POST the BIOS looks for the MBR which basically tells the hard drive what to load ect. The MBR holds the drives primary partition table. If the MBR becomes corrupt or damaged then you'll run into problems.

You can try a few things. First give the "fixmbr" command a try. This was suggesed by Blitz in a earlier post (thanks Blitz). Here are a few more details about this: http://pcsupport.about.com/od/termsf/p/fixmbr.htm.

You could also try replacing some files. Check out these quick instrutions: http://www.indiastudychannel.com/res...ING-Files.aspx. I'm not saying this procedure will fix the problem but it's worth a shot.

Good luck
I got it fixed by Formating, reinstalling my XP, but i ****ed up with it, by deleting accidently all my files, but im still happy so i go this fixed,

THX to everybody that helped me!
__________________
System: My System
CPU
AMD Athlon 64 3200+
Motherboard
Asus A8V
Memory
1.5 GB ddr 400mhz
Graphics Card
Asus EN8600GT SILENT 512Mb
Hard Drive
Samsung S166 160Gb SataII
Sound Card
Windows XP PRO SP3
Power Supply
Antec NeoPower HE High Efficiency 430W
Case
Antec
CPU cooling
Zalman CNPS7000B-Cu
azim is offline   Reply With Quote
Old 12-16-08   #10599 (permalink)
Need a New Protocol
 
Hueristic's Avatar
 
Join Date: Jul 2008
Location: Bottom_Of_A_Bottle
Posts: 7,676

Rep: 316 Hueristic is a proven memberHueristic is a proven memberHueristic is a proven memberHueristic is a proven member
Unique Rep: 213
Folding Team Rank: 63
Trader Rating: 1
Default

Quote:
Originally Posted by azim View Post
I got it fixed by Formating, reinstalling my XP, but i ****ed up with it, by deleting accidently all my files,
__________________
I seldom argue my advice, It's free take it or leave it. READ this thread before starting your first build!!!
ALWAYS power up a Mobo Before installing it! Consider Less than helpful posts as Free Bumps.
ĦĦĦʍʇɟ qn1ɔ uoıʇɐıɔǝɹddɐ 939 ʇǝʞɔos ǝɥʇ:
OCN's October Foldathon Prizes Thread Retro Rulez
This goes without saying but
1. If you can't afford to lose it don't mod or OC it.
2. At least read the OP before commenting.

Semper Fi
Overclock.net - 2009 Chimp Challenge Champions 2 Million+ Folding at Home points
Hueristic is online now I fold for Overclock.net Overclocked Account Hueristic's Gallery   Reply With Quote
Old 12-16-08   #10600 (permalink)
PC Gamer
 
HothBase's Avatar
 
amd ati

Join Date: Sep 2008
Location: Scandinavia, Europe
Posts: 351

Rep: 9 HothBase Unknown
Unique Rep: 8
Trader Rating: 0
Default

Quote:
Originally Posted by Hueristic View Post


Guys, I'm building a Phenom rig for my friend to replace his old computer. The new one is in my profile if anyone is interested, I haven't handpicked the parts tough, they come in a bundle, I'm just there to put it all together.

Anyway, he parts come with a copy of Windows XP x64 but he is thinking of buying Vista instead. If he does, then he has offered me the XP x64 as thanks for the help if I want it.
But I'm not sure if I need it, is there anything to be gained though x64 with just 2GB of RAM? Like higher bandwidth?
__________________
$ Progress towards AM3: 55% $
The rig below is my "Aeris"-build. I currently expect it to be done by Jan/Feb 2010.
These specs are estimates and will be modified if I manage to find a better solution in the same price range.

My current main rig? "Archon [Skt939 AGP]" in my profile.

System: Q1 '10 [AM3 HD5k] Aeris (55%)
CPU
Phenom II X3 720
Motherboard
Gigabyte GA-MA790XT-UD4P
Memory
OCZ Gold 2x2GB 1600MHz CL8
Graphics Card
XFX 5850
Hard Drive
WD Caviar Black 500GB
Sound Card
X-Fi XtremeMusic
Power Supply
Corsair CMPSU-650TX
Case
CM Dominator 690
CPU cooling
OCZ Vendetta 2 w/ MX-2
GPU cooling
Stock
OS
Windows 7 x64
Monitor
BenQ X900 19" (1280x1024) Plans for Samsung 2443BW
HothBase is offline   Reply With Quote
Reply

Tags
939, a8n32-sli deluxe, a8r-mvp, amd, amd x2, athlon 64, cfx3200-dr, ddr500, denmark, dfi expert, dfi lanparty, g.skill, manchester, newcastle, nf4 expert, nf4 sli dr, nf4 ultra-d, ocz, opteron, opty, san diego, socket 939, toledo, venice, venus


Currently Active Users Viewing This Thread: 3 (2 members and 1 guests)
blitz6804, Fa11ou7
Thread Tools



All times are GMT -4. The time now is 07:24 PM.


Overclock.net is a Carbon Neutral Site Creative Commons License

Terms of Service / Forum Rules | Privacy Policy | DMCA Info | Advertising | Become an Official Vendor
Copyright İ 2009 Shogun Interactive Development. Most rights reserved.
Page generated in 0.27915 seconds with 9 queries