The Socket 939 Appreciation Club and Knowledgebase [Official] - Page 1157 - Overclock.net

jimwest · 01-20-09

Hurray, it's official! 2.75 is my stable overclock. I don't feel good about taking the vCore to 1.5 or higher, so I'll stay here. The holy 2.8 eludes me.

Name Change · 01-20-09

Quote:

Originally Posted by jimwest

Hurray, it's official! 2.75 is my stable overclock. I don't feel good about taking the vCore to 1.5 or higher, so I'll stay here. The holy 2.8 eludes me.

Nice oc.

TestECull · 01-20-09

Jim: Grab a better cooler and up the Vcore a bit! 2.8 is soooo close, it's worth it if only to get the CPU-z and maybe a bench or two.

I'm crazy enough to run it 24/7 tho :P

Glarson · 01-20-09

Jacka · 01-20-09

What sort of voltage would a 90nm single core San Diego be safe to run at 18/7?

blitz6804 · 01-20-09

Likely no more than 1.450, 1.500 V if you are gutsy; it depends on your temperatures.

Glarson: Welcome to the club! Thlnk3r or Txtmstrjoe will add you to the on-site roster when they have a chance. I will add you to the off-site roster when I have the chance. Expect mine to take longer. (Just ask Name Change and Six-eyes-Sid who have pending speed changes, and jimwest who is still waiting to join since 01/15.)

pez · 01-20-09

Quote:

Originally Posted by N2Gaming

I just ran the test with 2x 9800 gt oc and the video displayed was all jack'd and the score still sucked for two cards. I'm gonna try them in my other m2n system and see if I get same or better results then this.

hmm that's strange. My 3DMark06 score is in my sig, but that's what I get with 2 cards. With one I got 9275, so it only went up about 500 w/ the second. I really wanna get 2.6 to be stable on this CPU. Curse the manchester OC'ing plague >.<.

**thlnk3r** · 01-20-09

Quote:

Originally Posted by jimwest

Hurray, it's official! 2.75 is my stable overclock. I don't feel good about taking the vCore to 1.5 or higher, so I'll stay here. The holy 2.8 eludes me.

Jimwest, do you have an updated cpu-z validation link that I could use to update the roster? Great job on the OC

Quote:

Originally Posted by Glarson

Glarson, welcome to the club. You've been added to the roster.

Blitz, does tRP and tRAS always have to equal tRC?

Quote:

Originally Posted by N2Gaming

I just ran the test with 2x 9800 gt oc and the video displayed was all jack'd and the score still sucked for two cards. I'm gonna try them in my other m2n system and see if I get same or better results then this.

N2Gaming, perhaps a driver conflict or a certain setting is hindering your 3DMark06 performance. The default test with my current setup turned in a 10,700. The CPU score does also look pretty low.

Good luck guys

**txtmstrjoe** · 01-20-09

thlnk3r, thank you for adding Glarson to our roster.

(I will kneel before Zod later.

) (inside joke)

Just speaking for myself here, it sure is nice to never have to worry about benchmarks... or multi-GPU setups.

Six-eyes-Sid · 01-20-09

9000's is low IMHO for that setup. I score 10700-10900 in vantage with my rig. i'm running 8800's my score is pretty much the same wether im doing 9x300 or 14x200 .

After getting the hardware setup the next thing is your software. I correctly configured system will gain you a bigger boost now. So will configuring things like services background programs etc.

I use blackvipers services guide to disable all unessesary services.

I have my nforce settings set to performance and tweaked to my preferences. Performance tweaks.

getting the bios motherboard drivers etc's just one side of overclocking, getting your software running optimally is the other.

		Overclock.net - Overclocking.net > AMD > AMD - General
The Socket 939 Appreciation Club and Knowledgebase [Official]

Currently Active Users Viewing This Thread: 2 (1 members and 1 guests)
BlackOmega