boonie2

saw a 4800+ on ebay the other day , might still be there ...but ebays always a crapshoot

txtmstrjoe

Welcome, sohail99! You are now officially a member of the Socket 939 Appreciation Club. We are glad to have you here.

In case you have the desire to go ever higher with your 3200+, there are lots of friendly and knowledgeable members here who will help you out. Just let us know how, and as you've probably seen, there will opinions and experience aplenty.

@ Poser: We haven't seen nearly enough of you lately, my friend! Good to see you, nonetheless. (And thanks for the offer of the G.Skills. I'll have to consider that.)

__________________

"What time is it? It's 9:39!" (The Official S939 Appreciation Club and Knowledgebase)My OCN Blog: Joe-Pinions (Have a Daily Nibble)

“Give a man a fish; you have fed him for a day. Teach a man to fish, and you have fed him for a lifetime.”—Lao Tzu (thanks to Blitz6804)

Today's "thlnk3r's thoughts": "You may fire when ready."

boonie2

WELCOME

Tigerplayer

@sohail99
have you tried to up the VCore? My 3200+ runs stable at 2600MHz and is also a Venice... I think I have mine at ~1.5v.

Also it would help if you put a divider on the RAM and set the HTT to 4x, that should get you up to about 2500MHz, which is kind of a sweet spot because of the 4x HTT speed.
I'm surprised that your Trancend RAM kan keep up, and i'd really like to see more...

go for them, you really won't regret it

pioneerisloud

We need more entries in our 939 case management contest!

__________________

sohail99

Thanks man!! I really need a lotta help!! lol!

Thanks!!

Whoa!! Athlon 64 venice@ 2600MHz!!!

Ok! i figured out and increased my VCore upto 1.4v via AMD Overdrive!!
Now can i OC more?

Also in my case AMD is cooled by stock cooler!! So, i dont think i can go as far as 2600MHz!! lol!

Here r my stock voltages -




Here r my Mem Timings, tell me what to change for optimal performance!!-




Here is the Vcore!! It can reach 1.4v Max!! I'll try to OC more!! -




Thanks guys!!

Attached Thumbnails

     

__________________
It's amazing what you can accomplish, if you don't care who gets the credit!!

pioneerisloud

Have you tried overclocking in BIOS yet? You'll probably get further that way .

__________________

thlnk3r

Welcome to the club sohail99!

__________________
AMD Overclocking Guides · Terms of Service · My CM690
Socket 939 Appreciation Club and Knowledgebase

Poser

@Scorpion.... sir if you are interested let me know, free o charge. If so... I will memtest each stick for 12hours for you (also free o charge ). I changed them out because I needed fresh, unclocked... unstressed stix for some mission critical work about 1.5 years ago. I moved the platform over ddr2 and AM2 since... and the box is now in a colleagues house. I dont have any use for them as anything other than back ups to my current 4 * 1gb config.

These stix were legendary (some of the first HZ in the retail channel) and I have yet to repeat their performance through several other pairs of HZ's.

One Caveat: I began to experience the occassional system crash (not bluescreen, mind you... but lock-ups and app crashes). I tested each stick individually and they passed 12hr memtest86 1.70. HOWEVER... (you knew there had to be a catch...) after about 1045% coverage in HCI memtest... errors were discovered. I did not get around to testing each stick individually using this methodology, but can if you are really interested in them. Bare in mind, I was blasting these with much higher than recommended voltage (2.93 in bios, 2.88 actual) but was actually seeing performance benefit (unusual for UCCC @ above 2.8v). But these boys clocked up to 275 @ 1t and 291 @ 2t. 275 1t was @ 3,3,2,7 as well (tight for UCCC running up this high).

Let me know, good sir... and I will see if they still have some fight left in them

__________________

pioneerisloud

I appologize for being so silent lately....not like my usual "loud" self :P. Trying to get a customer's computer up and running, and working on 2 rigs of my own as well, and trying to find the parts for my dad's rig. Go figure. It's been a rough week.

I'd like to present a warm welcome to all of our newer members. Hope you enjoy your stay in our little 939 variant of OCN....you might even learn something while you're here, or at worst you may turn out like me!

Boobteron FTW!

(Sorry I had to )

__________________