The Socket 939 Appreciation Club and Knowledgebase [Official] - Page 1666 - Overclock.net

Hueristic · 07-03-09

I'll gewt back on this asap BO, I'm done and gotta crash.

N2Gaming · 07-03-09

Quote:

Originally Posted by BlackOmega

Sorry for the double post, but did you guys see the special on steam for fall out 3 $24.99 50% off! I had to pick it up.

I saw fallout 3 today @ walmart but don't remember the price. I also saw a couple of other games I would like to get. So I wrote down the names and figured I would google them to see what kind of prices they come up with. Crysis Maximum Edition, 10th Anniversary Medal of Honor, Call of Juarez & a couple of other little cheap $9.99 games like Marine Sharp Shooter Trilogy & Hidden Expectations Amazon.

If Fallout 3 is not a valve game then I would rather buy the box DVD and get the User manual and case for a discount on ebay or some other software store that has a sell on games all the time.

Tator Tot · 07-03-09

Quote:

Originally Posted by Kryton

@ TaterTot:

That's a Sempron 3000+ Barton core in a Abit AN7 on air. Ran that last Feburary when I had some good ambient temps or that would not have been possible.
BTW, Socket A was never used with a NF3 chipset - NF2 only with those.

I also have a XP 3200+ and a Abit NF7 around here too....

My mistake. The Abit NF7-S2 is an amazing board I must say.

I did my run on AIR though, so I could have never kept it 24/7 stable.

If I ever got, or made, a Socket A watercooling setup I probably could though, as my basement ambient only spikes @ 25*C on the hottest days of the summer. (In Missouri) It's usually 18-20*C during the Winter, which is a great time & temp for suicide runs.

Kryton · 07-03-09

Quote:

Originally Posted by Tator Tot

My mistake. The Abit NF7-S2 is an amazing board I must say.

I did my run on AIR though, so I could have never kept it 24/7 stable.

If I ever got, or made, a Socket A watercooling setup I probably could though, as my basement ambient only spikes @ 25*C on the hottest days of the summer. (In Missouri) It's usually 18-20*C during the Winter, which is a great time & temp for suicide runs.

Mine is a regular NF7 2.0 board. It's a good one but doesn't clock well since it isn't modded. Just as stock as the day it was born. Here in Bama, we do get some cool temps but they don't last long at all, I'd say for around 2 weeks then things start warming up again.

Tator Tot · 07-03-09

Quote:

Originally Posted by Kryton

Mine is a regular NF7 2.0 board. It's a good one but doesn't clock well since it isn't modded. Just as stock as the day it was born. Here in Bama, we do get some cool temps but they don't last long at all, I'd say for around 2 weeks then things start warming up again.

You just need to dig your basement deeper.

I'm quite happy with Missouri.

My basement stays chilly all year round for Man-Cave related affairs, while the outside world gets a mix of Summer & Sun, or Winter & Snow.

The only thing we don't have that I love is surfing. But hey, you can't have the world..right?

timxirish · 07-03-09

Got a new CPU-Z to add to my 939 list.

This one is a different Opteron 165 than my first too, and it's in my Lanbox rig (which i'm currently using as my main). This Opteron 165 has officially replaced my Athlon 64 3500+, so it can either get a {s}{/s} through it or just be removed from the first post.

Here's my CPU-Z screenie with SuperPi results, and a validation link underneath.

At the moment, it's borrowing 2GB from my main rig (3GB is noticibly better, and sooo much nicer than I thought it would be

). Currently runs at 51C on average, and it's about a 20% overclock. It's a shame this case doesn't have the best cooling. Very easy to move around though...

Hueristic · 07-03-09

Quote:

Originally Posted by timxirish

Got a new CPU-Z to add to my 939 list.

This one is a different Opteron 165 than my first too, and it's in my Lanbox rig (which i'm currently using as my main). This Opteron 165 has officially replaced my Athlon 64 3500+, so it can either get a {s}{/s} through it or just be removed from the first post.

Here's my CPU-Z screenie with SuperPi results, and a validation link underneath.
At the moment, it's borrowing 2GB from my main rig (3GB is noticibly better, and sooo much nicer than I thought it would be

). Currently runs at 51C on average, and it's about a 20% overclock. It's a shame this case doesn't have the best cooling. Very easy to move around though...

What HS are you useing? I've got a non heat pipe on mine and can run 59c@280htt. My chip is also a JH9E6
I expect 300 24/7 when I get a Heatpiped hs on it. I've run it @300 but the temp levels at like 65c. I'm so bold as to run it at that 24/7 folding.

Kryton · 07-03-09

Quote:

Originally Posted by Tator Tot

You just need to dig your basement deeper.

I'm quite happy with Missouri.

My basement stays chilly all year round for Man-Cave related affairs, while the outside world gets a mix of Summer & Sun, or Winter & Snow.

The only thing we don't have that I love is surfing. But hey, you can't have the world..right?

If only I had a basement - That would be much better than what I have to work with here.
Getting ready to mow the lawn today and it's HOT outside. Good thing is the humidity isn't bad today but it's there all the same. May wait until later this afternoon before going for it when I have some shade on the backside to work in. After that, time to do some maintenance on my bike since it needs the attention. That's a priority since the valves are beginning to get a tad noisy plus the plugs have alot of miles on them too.

blitz6804 · 07-03-09

Nice timxirish; I love to see when people get more 939 love running.

For the record, back home is a nice 63º F, here is 75º F right now.

BlackOmega · 07-03-09

Quote:

Originally Posted by Kryton

That's why I never got into the IL2 series like alot of others did. Pacific Fighters has so many things you have to do, you'd have to spend hours just trying to figure out a decent way to fly. I also had a problem with the Up/Down directional control being inverted and never could figure out how to fix that. Even trying to configure the stick didn't work, it just did it so I set that one aside.

Well I was able to finally get the thing off the ground, but it seems like you're flying forever with nothing going on. Then if you try to do any stunts like barrel rolls (flaps in combat position) you lose control of the thing stall and crash.

Its like as soon as you go upside down the thing goes haywire and you spin radically out of control.

Then I tried flying the choppers on the Desert Combat mod for BF1942, well its a lot easier to fly those things with just the KB. But then again I've only had the JS for a couple days.

Quote:

Originally Posted by timxirish

Got a new CPU-Z to add to my 939 list.

This one is a different Opteron 165 than my first too, and it's in my Lanbox rig (which i'm currently using as my main). This Opteron 165 has officially replaced my Athlon 64 3500+, so it can either get a {s}{/s} through it or just be removed from the first post.

Here's my CPU-Z screenie with SuperPi results, and a validation link underneath.

At the moment, it's borrowing 2GB from my main rig (3GB is noticibly better, and sooo much nicer than I thought it would be

). Currently runs at 51C on average, and it's about a 20% overclock. It's a shame this case doesn't have the best cooling. Very easy to move around though...

Tim, why is your vcore so high?

It shouldn't need to be that high with a meer 360 MHz jump. I could get mine to 2300MHz pretty easily with no where near that vcore.

Quote:

Originally Posted by Hueristic

What HS are you useing? I've got a non heat pipe on mine and can run 59c@280htt. My chip is also a JH9E6
I expect 300 24/7 when I get a Heatpiped hs on it. I've run it @300 but the temp levels at like 65c. I'm so bold as to run it at that 24/7 folding.

Are those coretemps or IHS?

07-03-09	#16651 (permalink)
Hueristic Need a New Protocol Join Date: Jul 2008 Location: Bottom_Of_A_Bottle Posts: 7,762 Rep: 318 Unique Rep: 215 Folding Team Rank: 65 Trader Rating: 2	I'll gewt back on this asap BO, I'm done and gotta crash. __________________ I seldom argue my advice, It's free take it or leave it. READ this thread before starting your first build!!! ALWAYS power up a Mobo Before installing it! Consider Less than helpful posts as Free Bumps. ¡¡¡ʍʇɟ qn1ɔ uoıʇɐıɔǝɹddɐ 939 ʇǝʞɔos ǝɥʇ: [Official]November Foldathon Retro Rulez *This goes without saying but* 1. If you can't afford to lose it don't mod or OC it. 2. At least read the OP before commenting. Semper Fi

		Overclock.net - Overclocking.net > AMD > AMD - General
The Socket 939 Appreciation Club and Knowledgebase [Official]

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)