The Socket 939 Appreciation Club and Knowledgebase [Official] - Page 473 - Overclock.net

GuardianOdin · 06-24-08

Quote:

Originally Posted by blitz6804

I have an idea for you to try which I know you are going to hate:

Clear your CMOS.

Since you have an Asus this is harder to do than most people's, but when my computer absolutely refuses to place nice with an overclock, a CMOS dump will usually rectify the problem.

Might I suggest the same with your now-topless Opty my fellow S&Mer?

(By the way, your Sig Rig shows naked, but still shows lapped. That takes stones: lapping a bare CPU!)

whoops!...I guess it's no longer lapped

Yeppers, I passed S&M on the high test with the CPU at 100%

and I hope your talking to me or this may be awkward

nategr8ns · 06-24-08

I think part was for pio and part was for you

woohoo! once I got my drivers sorted I am not getting 4812PPD on my 88gt instead of the 3256 that it was stuck at for a while.

Valllldondo · 06-24-08

sign me up...not vaildated anything yet...
still in process of trying to get it OC'd properly..

link

help appriciated....

peice out yaol...

nategr8ns · 06-24-08

you've posted in the right place

are you stable at 2.9?!?

Valllldondo · 06-24-08

Quote:

Originally Posted by nategr8ns

you've posted in the right place

are you stable at 2.9?!?

CPU - 2900 MHz (ish)
HT - 970 MHz (ish)
DRAM Freq - 196 (ish)
PCI = 120 MHz (Windows OK - games crash if set any higher)
FSB = 240 MHz (Windows OK - games crash if set any higher)
CPU Multi = 12x 2400 MHz
CPU Volt = 1.400 V (max i can go to without the vcore mod)
Memory Clock = 133 MHz DDR333 (doesn't boot on DDR400)
CPU - NB Link - 800 MHz (x4)
NB - SB Link Speed - 800 MHz (x4)
0% CPU use - 29 to 32 degrees
70-100% CPU use - 45 to 49 degrees

Yip...as stable a a horse...(so far)

RAM timings are all on AUTO, appart from telling the MB that i am running DDR33's instead of DDR400's...will not boot up otherwise....
no idea about ram timings to be honest...never gone there..lol

limited to 1.4v cause of the wonderful asrock lock on it...
i am not feeling brave enough yet to perform the vcore mod on it to unlock it to 1.5v!....

but ANY other things that will make it better would be grand!

nategr8ns · 06-24-08

if you know the timings on your memory that could help.

Thanks for all those settings. I didn't see the link in your post (did you edit it in right after?)

Valllldondo · 06-24-08

Quote:

Originally Posted by nategr8ns

if you know the timings on your memory that could help.

Thanks for all those settings. I didn't see the link in your post (did you edit it in right after?)

know idea!...its tuesday afternoon and its nearly home time!!..lol

right getting the RAM timings...
Under CPUZ program...
what ones should i be concernd about.
The timings under the Memory Tab or
or
The timings under the SPD tab with the 166MHZ & 200 MHz in the table thing?

nategr8ns · 06-24-08

how about a screen shot of each?

blitz6804 · 06-24-08

The settings under the "memory" tab are what your settings actually are.

The settings under the "SPD" tab are what Kingston recommends for a 166 MHz and 200 MHz FSB respectively.

If you really think you are stable, try joining the S&M club. (Link is on the first page.) WARNING: I am not liable if your rig commits seppuku.