ZealotKi11er

Here is My single core Athlon 3700 @ 3.0Ghz
http://valid.x86-secret.com/show_oc.php?id=313731

txtmstrjoe

Thanks, ZealotKi11er! You're in.

__________________

"What time is it? It's 9:39!" (The Official S939 Appreciation Club and Knowledgebase)My OCN Blog: Joe-Pinions (Have a Daily Nibble)

“Give a man a fish; you have fed him for a day. Teach a man to fish, and you have fed him for a lifetime.”—Lao Tzu (thanks to Blitz6804)

Today's "thlnk3r's thoughts": "You may fire when ready."

Jman_345

http://valid.x86-secret.com/show_oc.php?id=313758


MY Sempron Going as Fast as Possible (Which isnt much)



Btw If anyone can Get me a Link to a place were they sell one of those DFI Lanparty nf4 Mobo it would be Greatly Appreciated...

__________________
========================================
Games Currently Playing
-Team Fortress 2
-Zombie Panic Source
-Day of Defeat
-Left 4 Dead

Add my Steam : Jman_514

pioneerisloud

I can get those links as soon as possible. However web browsing is proving to be quite difficult at the moment. Running Orthos Priority 5 in Vista x64 on the rig in my sig. It's currently running at 2.6GHz with the value RAM at 217MHz 3,4,4,8,2T (stock timings). Quite impressive if she proves stable. She better, I'm pushing 1.50v through her, in the hopes of stability. Temps are at 72*C.....I don't mind, this CPU's seen 95*C....so I'm quite sure the temp sensors are out of whack. I'll keep you updated and I'll provide a proof of stability and speeds screenshot when I call her done.

I'd also like to make note here....that those links should be easily attainable from the Official Order of the Opteron thread. I do believe they're still hanging out there on the first post. I could be wrong....if I am, I've got some googling to do once this rig is stable .

__________________

iandroo888

note to txtmstrjoe, those validations on my sig are not the highest ive been. they are only the highest stable. im not sure which you want. makes more sense to get highest stable right? heh

__________________

We Are Gr33n Machine | The ß₤ứə Çřёώ | The Cooler Master 690 Club | OCN Headphones Club

My Sale Thread !!! Come check it out !

Oscuro

My apologies:



That should work....I hope
Haven't OC'd yet due to craptacular, and error ridden Kingston Ram that was rock solid stable in my old board.....*grumble*

txtmstrjoe

Whichever you'd want to give, iandroo888.

I personally shoot for highest stable OC. I figure, "What's the point of all that speed, if your machine isn't reliable and stable for what you want/need it to do?"

Of course, that's just a personal opinion and viewpoint. It's not the only valid one out there.

Also, welcome to Oscuro! You've been added to the roster of the damned. I mean, the roster of the club...

You'll get more pub once you OC your Opteron 170.

Jman_345, you've been added as well. And I've highlighted the fact that you have a rare beast there. Not too many people even OWN Sempron64s, much less OC them.

As far as a link to where you can get a DFI LANParty nF4, well, I'm afraid that unless you can find one in the For Sale section, eBay might be your best shot.

FYI: I've bought one DFI UT LANParty nF4 board on eBay, and it was a good one. So don't automatically assume that these are not worth the risk.

As always, though, your mileage may vary.

__________________

"What time is it? It's 9:39!" (The Official S939 Appreciation Club and Knowledgebase)My OCN Blog: Joe-Pinions (Have a Daily Nibble)

“Give a man a fish; you have fed him for a day. Teach a man to fish, and you have fed him for a lifetime.”—Lao Tzu (thanks to Blitz6804)

Today's "thlnk3r's thoughts": "You may fire when ready."

Oscuro

Sweet, now I just need to get a good psu, and the ram to begin overclocking it.

GuardianOdin

Both Lapped, Today I decided to set my tower closer to the floor and near the window for some nice fresh winter air. Dropped down to 23-25c Idle and maxed at 65c running OCCT. I am heading to watercooled in a few weeks. need the CPU Block and Chipset block. Only thing I have right now is a decent sized Harley Davidson radiator chromed copper "shiny"

__________________
¡¡¡ʍʇɟ qn1ɔ uoıʇɐıɔǝɹddɐ 939 ʇǝʞɔos ǝɥʇ I Draw Stuff....
Come join OCN's 48-hour Fold-a-Thon August 18th

txtmstrjoe

Sweet! Sorry, man, didn't know that you had your surfaces lapped.

For sure, ambient temps have the biggest effect on lowering component temperatures.

When you get your water-cooling kit all done, I hope we get pictures! Also, when you get this project up and running, maybe you can be persuaded to do a pictorial "how-to" and post it on the thread? I'd be glad to help out with that and collaborate with you.

__________________

"What time is it? It's 9:39!" (The Official S939 Appreciation Club and Knowledgebase)My OCN Blog: Joe-Pinions (Have a Daily Nibble)

“Give a man a fish; you have fed him for a day. Teach a man to fish, and you have fed him for a lifetime.”—Lao Tzu (thanks to Blitz6804)

Today's "thlnk3r's thoughts": "You may fire when ready."