|
|
|
10-06-08
|
#7751 (permalink) | |||||||||||||
|
RAM Fan
 
|
Alright, here we go:
Bogeyone001: Your CPU's maximum safe temperature is 71º. Unfortunately, I fear you have fun afoul of the overclocking bug: it is possible you have fried your OS. First, before we jump to conclusions, please check in the BIOS that RAID is enabled. Next, after POST, press the key to open the RAID configuration. Be sure it shows the RAID 0 Stripe as healthy. If it is enabled in the BIOS, and reads as healthy, and still will not boot Windows, get your hands on the Windows install CD. If I recall though, that problem is a Vista-exclusive one. Is your sig rig wrong? The voltage Thlnk3r and I referred to was your VCore, not your chipset voltage. Stock for your chip, as has been previously shown is 1.350 V. If that is not Orthos stable, try 1.375 V. Then 1.400 V. Then try 1.425 V and so forth. Remember that maximum safe temperature is 71º C. Also, you did remember to put the RAM on a divider as necessary right? You want the DDR 266 (200:133 divider) for your present HTT. (As of post 7724.) In post 7730, your tRP, tRAS, and tRC are too tight, likely the cause of the instability. Loosen them to 3, 8, and 11 respectively. Pez: the stock timings for that RAM at DDR 500 is 3-3-2-8-1T @ 2.8 V. Running at a CAS of 2.5 is tighter than CAS of 3.0, and may result in instability without additional RAM voltage. huntman21014: If you want in, all you need to do is post a CPU-Z validation link or a screen shot, such as Bogeyone001 did in post 7724 or Pez in 7726.
__________________
¤ The Loricatus Draco life thread. Now awaiting an HD 5970! ¤ ¤ I have no idea what it will 3DMark at 3510 MHz. ¤ ¤ Upgrade budget: ■■■■■■■■■■ ($0 / ∞) ¤ ¤ B.S. in Chem., Cum Laude, Minors in Maths and Crim. Justice, J.D. {Pending} ¤ ¤ Almost all PC parts come with manuals. Ask me to find yours! ¤ ¤ Want a real socket? Get Socket 939! ¤ ¤ Today Txtmstrjoe presents: "[Steppings] merely indicate possible outcomes due to the law of averages being in your favor." ¤ ¤ ... ¤
|
|||||||||||||
|
|
|
10-06-08
|
#7752 (permalink) | ||||||||||||
|
Overclocker in Training
|
so it shows my raid array i was just missing it it went so fast but now it is telling me NTDLR is missing..
__________________i am going to put in and old ide and try that to see if i can boot It says raid stripe is healthy and i have XP not vista also my sig rig isnt wrong as far as i know fortunately for me i have an xp os cd
Last edited by Bogeyone001 : 10-06-08 at 09:39 PM |
||||||||||||
|
|
|
|
10-06-08
|
#7753 (permalink) | |||||||||||||
|
RAM Fan
|
RAID 1? Your signature says Stripe. Stripe is RAID 0. When you were in Windows, did you see 931 GB or 466 GB as your hard drive size? (Approximates)
__________________
¤ The Loricatus Draco life thread. Now awaiting an HD 5970! ¤ ¤ I have no idea what it will 3DMark at 3510 MHz. ¤ ¤ Upgrade budget: ■■■■■■■■■■ ($0 / ∞) ¤ ¤ B.S. in Chem., Cum Laude, Minors in Maths and Crim. Justice, J.D. {Pending} ¤ ¤ Almost all PC parts come with manuals. Ask me to find yours! ¤ ¤ Want a real socket? Get Socket 939! ¤ ¤ Today Txtmstrjoe presents: "[Steppings] merely indicate possible outcomes due to the law of averages being in your favor." ¤ ¤ ... ¤
|
|||||||||||||
|
|
|
|
10-06-08
|
#7754 (permalink) | |||||||||||||
|
RAM Fan
|
Sorry for double, but I do not want you to miss this:
Here is a possible way to fix the error: Insert the Win XP setup disk and boot to it Open the repair console ("R" key) Open the Windows installation that is broken (should be the "1" key) Type in the administrator password (if present; else, hit enter) If Windows is installed on C:\, and your optical drive is E:\, Type: copy e:\i386\ntldr c:\ Hit enter Type: copy e:\i386\ntdetect.com c:\ Hit enter Reboot; remember to remove the disk
__________________
¤ The Loricatus Draco life thread. Now awaiting an HD 5970! ¤ ¤ I have no idea what it will 3DMark at 3510 MHz. ¤ ¤ Upgrade budget: ■■■■■■■■■■ ($0 / ∞) ¤ ¤ B.S. in Chem., Cum Laude, Minors in Maths and Crim. Justice, J.D. {Pending} ¤ ¤ Almost all PC parts come with manuals. Ask me to find yours! ¤ ¤ Want a real socket? Get Socket 939! ¤ ¤ Today Txtmstrjoe presents: "[Steppings] merely indicate possible outcomes due to the law of averages being in your favor." ¤ ¤ ... ¤
|
|||||||||||||
|
|
|
|
10-06-08
|
#7755 (permalink) | ||||||||||||
|
Overclocker in Training
|
yea i meant 0
__________________and it shows 931.52 GB will try solution now the first part of that works and says file copied but the second command says the file cannot be copied
Last edited by Bogeyone001 : 10-06-08 at 09:57 PM |
||||||||||||
|
|
|
|
10-06-08
|
#7756 (permalink) | |||||||||||||||
|
AMD Overclocker
|
Quote:
__________________
Quote:
 ¡¡¡ʍʇɟ qn1ɔ uoıʇɐıɔǝɹddɐ 939 ʇǝʞɔos ǝɥʇ I Draw Stuff.... Come join OCN's 48-hour Fold-a-Thon August 18th
|
|||||||||||||||
|
|
|
|
10-06-08
|
#7757 (permalink) | |||||||||||||
|
RAM Fan
|
Try restarting the PC and try copying the second file again. If it fails again, we will need to look into a FixMBR.
Failing that, a repair installation may be in your future. And would people stop proving me wrong today!? *Slaps GuardianOdin and SerenityKill3r in the face with large tunas.*
__________________
¤ The Loricatus Draco life thread. Now awaiting an HD 5970! ¤ ¤ I have no idea what it will 3DMark at 3510 MHz. ¤ ¤ Upgrade budget: ■■■■■■■■■■ ($0 / ∞) ¤ ¤ B.S. in Chem., Cum Laude, Minors in Maths and Crim. Justice, J.D. {Pending} ¤ ¤ Almost all PC parts come with manuals. Ask me to find yours! ¤ ¤ Want a real socket? Get Socket 939! ¤ ¤ Today Txtmstrjoe presents: "[Steppings] merely indicate possible outcomes due to the law of averages being in your favor." ¤ ¤ ... ¤
|
|||||||||||||
|
|
|
|
10-06-08
|
#7758 (permalink) | |||||||||||||
|
RAM Fan
|
Sorry for another double.
While you have the recovery console open, please type: type c:\boot.ini Retype every single thing there on here. Make sure you get the syntax exact.
__________________
¤ The Loricatus Draco life thread. Now awaiting an HD 5970! ¤ ¤ I have no idea what it will 3DMark at 3510 MHz. ¤ ¤ Upgrade budget: ■■■■■■■■■■ ($0 / ∞) ¤ ¤ B.S. in Chem., Cum Laude, Minors in Maths and Crim. Justice, J.D. {Pending} ¤ ¤ Almost all PC parts come with manuals. Ask me to find yours! ¤ ¤ Want a real socket? Get Socket 939! ¤ ¤ Today Txtmstrjoe presents: "[Steppings] merely indicate possible outcomes due to the law of averages being in your favor." ¤ ¤ ... ¤
|
|||||||||||||
|
|
|
|
10-06-08
|
#7759 (permalink) | |||||||||||||
|
Overclocker in Training
|
Quote:
ok will post back in a few with results so the second line copied but still says NTLDR is missing missed the boot command so putting it in now
Last edited by Bogeyone001 : 10-06-08 at 10:18 PM |
|||||||||||||
|
|
|
|
10-06-08
|
#7760 (permalink) | ||||||||||||
|
PC Gamer
Join Date: May 2008
Location: North Carolina
Posts: 4,326
Rep: 180
 Unique Rep: 138
Trader Rating: 14
|
Here's an update on mine if you don't mind to update it
 . EDIT: Crap gotta retake...wrong tab in gpu-z K here we go: 
__________________
Cooler Master Storm Sniper on the way! Review/Comparison: AMD Athlon X2 7750 BE vs. AMD Phenom II X4 940 BE 3DMark06: 16685 3DMark Vantage: 10149
Last edited by pez : 10-06-08 at 10:14 PM |
||||||||||||
|
|
|
 |
| Currently Active Users Viewing This Thread: 2 (1 members and 1 guests) | |
| FnkDctr |
| Thread Tools | |
|
|
