thlnk3r

Xsabrewulf, it could be possible that you have a failing drive. What brand/model is your hard drive? As suggested already, if you have Seagate drive then please download the Seagate Seatools. You can download those by going here: http://www.seagate.com/www/en-us/sup...loads/seatools. If you have a Western Digital drive then you need to download the Data Lifeguard Diagnostic tools. You can download those by going here: http://support.wdc.com/product/downl...&sid=3&lang=en. The WD diagnost tools is a small download that can burnt to a CD as a bootable image. There should be four options, Quick Test, Extended Test, Write Zero's and View Test Results. Please run the "Extended Test".

Please do so now and let us know. Do not run these diagnostic tools within Windows.

Good luck

__________________
AMD Overclocking Guides · Terms of Service · My CM690
Socket 939 Appreciation Club and Knowledgebase

txtmstrjoe

xsabrewulf, it looks to me like you've got a HDD on its last legs. How old is the HDD in question?

At any rate, it's prudent to start backing up everything valuable on that HDD. Per the quick research I've done on these error messages, it's a question of when (not if) that HDD will finally kick the bucket.

Hope this helps.

__________________

"What time is it? It's 9:39!" (The Official S939 Appreciation Club and Knowledgebase)My OCN Blog: Joe-Pinions (Have a Daily Nibble)

“Give a man a fish; you have fed him for a day. Teach a man to fish, and you have fed him for a lifetime.”—Lao Tzu (thanks to Blitz6804)

Today's "thlnk3r's thoughts": "You may fire when ready."

xsabrewulf

WD SE16

3 years old...

My S.M.A.R.T shows Fitness: 94% and Performance: 98%

the only thing SMART is low on is: Power On Hours Count

which is 75

xsabrewulf

I ran a cleanup program called Advanced Windowscare V2 personal... is this a good program? I just went on a limb and had it clean everything

ninjinsamax3

It is good to a point, but sometimes those type of programs like Advanced Windowscare V2 can harm the computer system tools. It had happened to me before and I could not use Windows and had to reformat.

Try what Thinker suggested. Though 3 years old drive should still be ok to me.

__________________
I am currently very busy with moving, so if you have helped me and not get what you deserved or any replies from me in PM or on Threads, I apologize. When I have time, I will definitely reply and give you what you guys deserve. Thank you for understanding, since I also lost my summer with this sudden move. I promise that I will get back to all of you guys. OCN honor!

今学校のため、忙しくがんばってる※運命の人を探してる中だっ
folding/フォールディング:what is folding?※my folding※OCN's 24 Hour Fold-A-Thon
javascript/ジャバスクリプト:profit calculator
for sale/フォー・セール:coming soon
project/プロジェクト:coming soon

thlnk3r

Xsabrewulf, did you run the extended test using the WD Diagnostic tools? This is a sector by sector scan. I recommend performing this just so we can rule out a "bad" hard drive.

Good luck

__________________
AMD Overclocking Guides · Terms of Service · My CM690
Socket 939 Appreciation Club and Knowledgebase

lattyware

Frankly, it's more likely the disk problems are caused by the crashing, rather than being the cause of the crashing.

__________________
Lattyware | Main (Sig) Rig: gBOX42 | Lan Rig: gLAN42
Never been convinced by Linux? Here is a challenge. | Using LVM
Scratched Disc? | Guide To LAN Parties | Writing a GUI application in Python/Glade
Etching an image into your case. | Wireless Access Points: Easy wireless networking.
A Member Of The OCN Anime/Manga Club
"I disapprove of what you say, but I will defend to the death your right to say it." --Evelyn Beatrice Hall

thlnk3r

Latty, performing a diagnostic(surface scan) on the hard drive would still rule out a bad drive. The process of elimination is lengthy but can be rewarding

Good luck

__________________
AMD Overclocking Guides · Terms of Service · My CM690
Socket 939 Appreciation Club and Knowledgebase

xsabrewulf

well i ran the extended test

quick scan found no errors


but when i run the full media scan... IT LOCKS UP... at like 40% done

im running it again but not a good start.


what next?

thlnk3r

Xsabrewulf, your machine should not be locking up during any type of hard drive surface scan. That could either be a sign of a bad drive OR perhaps the system itself is not stable during the diagnostic. Have you physically reviewed your motherboard to see if any caps are bulging/leaking? Look at the caps especially around the cpu socket.

I'd also suggest testing the rails on your power supply. If you have a multimeter laying around this can easily be done. Check out this guide found here for the proper procedure.

Let us know

Good luck

__________________
AMD Overclocking Guides · Terms of Service · My CM690
Socket 939 Appreciation Club and Knowledgebase