|
|
|
#1 (permalink) | ||||||||||||
|
Case Modder
![]() |
hi guys just put together my new 550BE and Biostar 790GX.
im using on board GPU as i blew mine last week ![]() since i booted it and got it all setup i have been getting artifacts on pictures and my desktop back ground. its very strange as the PC will not lock up it just has random artifacts on images and things? any ideas what this could be?
|
||||||||||||
|
|
|
|
|
#2 (permalink) | ||||||||||||||
|
PC Gamer
![]() |
Did the motherboard come with drivers for onboard video? If so, install them. My only other suggestion is to use Driver Sweeper to make sure you cleaned out the drivers of your card. Make sure you follow these instructions when using it.
Quote:
|
||||||||||||||
|
|
|
|
|
#3 (permalink) | |||||||||||||
|
Heru <3
![]() |
Yeah make sure the drivers are installed properly. Run Memtest on your RAM. If your RAM is fine the onboard vRAM might be bad.
Edit: Also make sure your cable doesn't have a bent pin.
__________________
|
|||||||||||||
|
|
|
|
#4 (permalink) | ||||||||||||
|
Case Modder
![]() |
MemTest passed with no errors!
i will need to hook up a Disk drive and reinstall the drivers.
|
||||||||||||
|
|
|
|
|
#5 (permalink) | ||||||||||||
|
Case Modder
![]() |
Well since i ran Memtest and checked all drivers. i havent had the problem. so it could possibly be fixed!
|
||||||||||||
|
|
|
|
|
#6 (permalink) | ||||||||||||
|
New to Overclock.net
|
Just a quick question. When you run memtest, should you test one memory at a time or it is fine testing with two memories install at the same time?
__________________Thanks
|
||||||||||||
|
|
|
|
|
#7 (permalink) | |||||||||||||
|
PC Gamer
![]() |
Test them all together. If you get errors, run it with one at a time til you figure out which stick is bad.
|
|||||||||||||
|
|
|
|
|
#8 (permalink) | ||||||||||||
|
New to Overclock.net
|
Got it. Thanks
__________________
|
||||||||||||
|
|
|
|
|
#9 (permalink) | ||||||||||||
|
Case Modder
![]() |
the issue still hasnt came back so i assume the drivers fixed it?
|
||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|