jstupiansky

Not here anyway.

__________________
3.9 GHz CPU-Z Verified ~~ 10k 3DMark06 ~~ 13 sec. Super Pi
Do you live in Ohio? Post in the Ohio overclocker's thread!

ChinMusic

AWESOME GUIDE! You're the man! Rep for you!

isstern35

hey i have my xp-m 2500+ running at 2200mhz so far.. i was wonder i have corsair value ram that i use.. you think i can push the system more with that ram or should i get better and if so what kinda

__________________
3Dmark06 12458 o/c stock: 11500
3Dmark03 36861 o/c stock: 32345

DeathONator

It depends, right now we don't know what is limiting you, your CPU, memory, or motherboard. If 2200mhz is stable, try increasing the multiplier. If increasing the multiplier makes it unstable, then it is your CPU that is limiting you (you could try and increase voltage if you're not already really high and if your temp are still ok). If you can increase the multiplier to run it at a higher speed (and when trying to increase the FSB you couldn't run it at this speed), then it is either your mobo or memory. You can then mess with the motherboard:memory divider. Find out if you can increase your FSB if the motherboard is set to have a higher FSB than the memory and visa versa.

Good luck.

__________________
Fold for the cure & team 37726!!
H2O cooling: Chevette heatercore, 172mm 258CFM fan, Apogee GT, and Ehiem 1250. Load temp @ 1.45vcore 41C.

isstern35

i have a feeling its my memory. if i try to lower the memory stepping it doesnt boot. so i live it in Optimal option in my bios for some reason cuz every time i try to increase the speed my system goes crazy and starts to reboot.. i know for a fact if i wanna go more i need better cooling. probably thermaltake. but i was just asking opinion. i might have to buy better memory probably XMS.

__________________
3Dmark06 12458 o/c stock: 11500
3Dmark03 36861 o/c stock: 32345

Minea

For me, my processor isn't supported by MBM, is there any other programs out there that can monitor temperture?

DeathONator

Check your motherboard manufacturer's website. Alot of them have their own program.

__________________
Fold for the cure & team 37726!!
H2O cooling: Chevette heatercore, 172mm 258CFM fan, Apogee GT, and Ehiem 1250. Load temp @ 1.45vcore 41C.

TwIsTeDbOi

Hey man, just for an idea, can you add in what the DDR dividers are in ratios? Like 1:1 is DDR400, 1:@ is DDR200 and so on and so forth?

__________________

Minea

Alright, Another question.

When i boot up into BIOS there is no option to change my FSB and all of that, does that mean my motherboard doesn't support Overclocking? or is it just "hidden" or someplace else?

ChinMusic

Depends on your mobo. Its typically somewhere under the Advanced tab, maybe in "Jumperfree Configuration" (if you got an A8N-SLI). Post your system specs, itll be easier for all of us .

__________________