SexySamy

Heya all. Just want to ask a question. Is it possible for rams to be asking for more volt when the ram is underclock and with 5-5-5-15-26-2T timings?? I seem be to getting that problem which is hidering me for getting higher clocks. CPU is fine but ram is like volt hungry. Is it something that I did wrong in my timing??

My ram is OCZ DDR2 2G kit pc2-6400.
http://www.ocztechnology.com/product...y_dual_channel

The webby of my ram. Part number is OCZ2T8002GK.

Thank for the replies in advance.

The Duke

Oddly enough, even when I was divided to near default timings/speeds, the SB was voltage hungry at higher OCing speeds. Without the SB (or Chip Set, MB BIOS dependent) voltage increases I'd get RAM errors, go figure.

__________________

SexySamy

Heya duke, yes, same thing happening over here. For now, if I do not change the SB Volt, the error given would be round error of 0.5 instead of 0.4 which usually mean the voltage was not enuff. If I increase too much volt, I would get error in many numbers. Up my SB or NB volt, i again get numbers.

I do not understand this thing. Why is it happening like this??

craig198

hmm this is interesting. so which setting is it in the bios to increase SB voltage? NB-SB? SB standby v?

SexySamy

Heya, thanks for the reply. I do not have a pure sb volt or nb volt increase. its like sb<>nb something like that.

http://www.rebelshavenforum.com/sis-...;f=53;t=000525

that webby has a bios ss. Take a look.

Well, so what is wrong with my ram?? Is it my timings or is it my oc isnt proper or any other things that is wrong??

craig198

which memory testing program are you using? im using orthos beta stress ram.

i fail everytime after the 3.2 Ghz cpu barrier. even with memory below stock mhz.(/667) and
I tried...
2.2 volts ram 2.1v
ht link lowered to X4
5-5-5-15-2T
there is list among list of tweakable memory settings in my bios. and I stare at them with drool hanging from my lip lol

superk

your ram is set to /667 but is it still running at 800 due to OC?