gerikoh

yeah, the voltage setting of that board is very confusing.
i am so going gigabyte on my upgrade.

hehe anyway

for the ram, it's actually 1=+0.010v
and for the cpu, it's 1=+0.004v

__________________


Ultimate Quad Core Clock for Clock Benchmarks:

**The Prolimatech Club**

Thesis/HTPC Notebook: Puma's Cartwheel

monsta

That is where I was getting confused had the decimal point in the wrong place!! Must have been a lack of sleep issue or maybe a newbie issue!!LOL

I agree some of the BIOS on this board are not that friendly at all definitely gonna upgrade soon which means I can use this setup for more learning purposes.

Thanks again for all your help, it is holding well at current settings!! Gonna play with the CPU some more after seeing in the 7750 section what some other members are getting out of theirs!!

fransurbo

With the latest version 080014 (02/02/2009) you can now set the NB frequency! The new option is in 'M.I.M. (MB Intelligent Bios)->AMD CPU Function'. I'm running my NB at 2GHz (x10/2000MHz). Get's a little hot (59ºC/138ºF), but so far it looks stable. I could probably bump it further if I buy an aftermarket chip cooler...

fransurbo

What does the '3:8' in FSB:DRAM mean exacly? When I set my DRAM speed to 400MHz, it reads '1:2' (which should mean that the DRAM is 'multiplexed' (?) by two, thereby running in 800MHz. But '3:8'? I'm usually resonably good at math, but that...

And what about 'Bank Cycle Time (tRC)'?