Buster

When I did the memtest it was only 46% coverage when it said that the ram passed and when I did Prime95, it failed. I don't have the cpu overclocked. It is very stable when I set it to 7-7-7-20 @ 1066MHz and 1.65v, but I want to overclocked it to its advertised speed so please help me. Should I make it 7-7-7-24 @ 1333MHz and 1.75v with NB v to 1.2 and HT and NB to 2200?

Timlander

Well with memtest, if it came up with any message then your ram did not pass. It only gives you a message if the ram fails. Yes try the NB v and HT and NB clock settings I gave you. You are on a different motherboard than me, so my settings may not work for you unfortunately...

__________________

HD 4890 vs GTX 285

McDown

I think this RAM require 1.8-1.9V.

__________________

Timlander

Yes if his ram is like mine then it needs 1.9V @ 1600. But when your running at 1333 you dont need the full 1.9V.

__________________

HD 4890 vs GTX 285

Buster

I have tried to run it at 1600MHz with 9-9-9-24 @ 1.9v, but it fail the prime95 test. But I did get it to run stable at 1333MHz with 8-8-8-24 @1.8v.

Buster

I have tried so many times, but it will only run most stable and still stable after overclocked is 1066MHz 7-7-7-16 @ 1.6v. Other than that it will not passed prime95 with either 1333MHz or 1600MHz. Thanks guys for helping.

Timlander

Ugh...sry to hear that man. Your motherboard is totally different than mine so I have nothing else I can do for you... =*(

__________________

HD 4890 vs GTX 285