Dopamin3

I am trying to run 1 stick of Corsair Dominator memory (part #CM3X2G1600C8D according to CPU-Z, believe it is listed on Corsair site as "TR3X6G1600C8D") in my DFI LP DK 790FXB-M3H5. I set the timings like they're supposed to be (1600mhz @ 8-8-8-24-41 2T with voltage @ 1.657v) and the board fails memtest86 fairly quickly and system instability is noted within Windows. Currently running 1333mhz with 7-7-7-24 with no problems. The board is running bios 0402 and the memory module is in the far right orange spot. Included is a pic from my bios. I also flashed to newest beta bios D7SD617 which supposedly "Enhance DDR3 Memory module performance" but memtest still fails at test #5. On an unrelated note, this bios does not allow for cores to be unlocked using ACC either...

Attached Thumbnails

 

__________________

Dopamin3

Can anyone help PLEASE. I am about to throw my computer out the window.

__________________

samstaee

It might not run at those setting on your motherboard.
On the corsair website says that those timings are on a x58 board I think, so maybe try slightly losening the timings, or adding a little bit of voltage.
Unfortunately I cannot give you the safe voltages that those chips will do