|
|
|
 |
Overclock.net - Overclocking.net > AMD > AMD Memory | |
Which better 3g 800 or 2 g1200
|
||
 |
|
|
LinkBack | Thread Tools |
09-29-09
|
#1 (permalink) | ||||||||||||
|
New to Overclock.net
 
|
Which better 3g 800 or 2 g1200
I have 3gig of ddr2 800 Cas Latency: 6 and 2gig ddr2 1200 oc Cas Latency: 5. Which ones would be overall better for ocing cpu?
__________________
|
||||||||||||
|
|
|
09-30-09
|
#2 (permalink) | ||||||||||||||
|
Danke schön
 
|
2GB Cas 5 1200.
Depending on the CPU (going by your sig rig) you can set the divider to DDR2 1066, and then you only need 225 HT clock to get to 1200mhz.
__________________
Check Out My Sammich! Quote:
Missouri Overclockers The ß₤ứə Çřёώ The Red Tide ATi Owners Unite nVidia's Gr33N Machine
|
||||||||||||||
|
|
|
09-30-09
|
#3 (permalink) | ||||||||||||
|
New to Overclock.net
|
Ok. One question it is stable in XP at that speed with cpu oc ,but not in Vista at that speed with cpu oc. I have OCZ Flex XLC and the timing is set right. CPU at 3.5 ghz. Stable at memory 1066 and oc cpu in Vista. Any thoughs?
__________________
|
||||||||||||
|
|
|
|
09-30-09
|
#4 (permalink) | ||||||||||||||
|
Danke schön
|
It's probably just because you're on Vista.
Vista has been known to not handle overclocks as well, that is why most "professional overclockers" use Windows XP to bench and validate on. I could do 3.5ghz/2600mhz NB/1200mhz RAM in Windows XP, but Vista I have to go down to 2550mhz NB, 1174mhz RAM, 3.4ghz CPU with higher voltage on my 7750 Black Edition.
__________________
Check Out My Sammich! Quote:
Missouri Overclockers The ß₤ứə Çřёώ The Red Tide ATi Owners Unite nVidia's Gr33N Machine
|
||||||||||||||
|
|
|
|
09-30-09
|
#5 (permalink) | ||||||||||||
|
New to Overclock.net
|
Ok. Thanx +1rep.
__________________
|
||||||||||||
|
|
|
|
09-30-09
|
#6 (permalink) | ||||||||||||||
|
Danke schön
|
No problem man.
Though, a quick suggestion, if your board allows try raising the CPU-NB voltage to 1.35-1.4v and see if that stabilizes you. It's the voltage for your memory controller, and Vista requires that extra Voltage.
__________________
Check Out My Sammich! Quote:
Missouri Overclockers The ß₤ứə Çřёώ The Red Tide ATi Owners Unite nVidia's Gr33N Machine
|
||||||||||||||
|
|
|
|
09-30-09
|
#7 (permalink) | |||||||||||||
|
New to Overclock.net
|
Quote:
|
|||||||||||||
|
|
|
|
09-30-09
|
#8 (permalink) | ||||||||||||||
|
Danke schön
|
No problem man.
AMD Overclocking isn't always the easiest persay, but they can be damn fun. Good luck 
__________________
Check Out My Sammich! Quote:
Missouri Overclockers The ß₤ứə Çřёώ The Red Tide ATi Owners Unite nVidia's Gr33N Machine
|
||||||||||||||
|
|
|
|
09-30-09
|
#9 (permalink) | ||||||||||||
|
New to Overclock.net
|
CPU-NB voltage to 1.4v works. When I exit the game the system is not going into the BSOD. Thanx Tator Tot.
__________________4 mins later. Spoke to fast it went to BSOD. I guess set it back to 1066(memory) and run it.
Last edited by dixson01974 : 09-30-09 at 01:47 PM |
||||||||||||
|
|
|
|
09-30-09
|
#10 (permalink) | ||||||||||||||
|
Danke schön
|
What other voltages do you have set?
What timings are you using? And what specific sticks do you have?
__________________
Check Out My Sammich! Quote:
Missouri Overclockers The ß₤ứə Çřёώ The Red Tide ATi Owners Unite nVidia's Gr33N Machine
|
||||||||||||||
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
