|
|
|
 |
Overclock.net - Overclocking.net > AMD > AMD Memory | |
my ram speed should be 1066mhz but its at 800mhz???
|
||
 |
|
|
LinkBack | Thread Tools |
09-30-09
|
#1 (permalink) | |||||||||||||
|
First Time Build
|
my ram speed should be 1066mhz but its at 800mhz???
hey i bought a ocz gold memory (2x2gb) @1066mhz. however when i take a look at my bios the ram speed is set at 800mhz. why is this, and how do i change it to 1066mhz please??
__________________help needed ty 
|
|||||||||||||
|
|
|
09-30-09
|
#2 (permalink) | ||||||||||||
|
Mobo Master
 
|
Well, you go into bios and set the memory divider so it runs at 1066mhz. Then don't forget to set the proper memory voltage and timings!
__________________
Quote:
|
||||||||||||
|
|
|
|
09-30-09
|
#3 (permalink) | |||||||||||||
|
First Time Build
|
do i need to change the voltage or anything else than the speed to 1066??
__________________
|
|||||||||||||
|
|
|
|
09-30-09
|
#4 (permalink) | |||||||||||||
|
Mobo Master
|
Quote:
__________________
Quote:
|
|||||||||||||
|
|
|
|
09-30-09
|
#5 (permalink) | ||||||||||||
|
Commando
 
|
Set your ratio in BIOS. and apply the factory settings like 5-5-5-15 etc and the voltage required for 1066.
Think that should help you.If I run my i7 at stock settings my 2000mhz ram is 1333mhz 
__________________
Core i7 920 d0@ 5027.22 MHz |239.39x 21| at H20 Hwbot.org Profile My Overclocking setup Kingpin F1 Dragon w/ Alu extender CPU pot Asus Commando P965 OCZ Flex PC9600 2GB CPU: E4700|P4 540|Celeron 331| more to come
|
||||||||||||
|
|
|
09-30-09
|
#6 (permalink) | |||||||||||||
|
AMD Overclocker
 
|
Quote:
You MIGHT see memory divider (or memory frequency) listed as 400 (not 800). Because AMD systems run a 2:1 ratio, they will list it this way. If it's 400, then set that value to 533 (since 533x2=1066). Make sense? Good luck!
|
|||||||||||||
|
|
|
|
09-30-09
|
#7 (permalink) | |||||||||||||
|
First Time Build
|
thanks guys
__________________
|
|||||||||||||
|
|
|
|
10-05-09
|
#8 (permalink) | |||||||||||||
|
PC Gamer
|
I got the same set and it doesnt show up as 1066 mhz ,also 800 in cpuz.
The problem is,they wont run 1066 5-6-6-18 @ 2.15v.Mines need 2.22v to get to 1000mhz and 5-6-6-20... I hope you got a better set.
__________________
dafour.deviantart.com
|
|||||||||||||
|
|
|
|
10-05-09
|
#9 (permalink) | ||||||||||||
|
New to Overclock.net
|
I'm having a similar problem with my G.Skill DDR3 1600 memory running at 800. I changed the BIOS from auto to 1333 and no change according to CPUZ. I set the timings to the box 9-9-9-24 settings. I couldn't find where to enter the voltage setting. The sticker says 1.5-1.6v.
__________________Any ideas?
|
||||||||||||
|
|
|
|
10-06-09
|
#10 (permalink) | |||||||||||||
|
AMD Overclocker
|
I have the same problem.
The other problem I have is that the IMC doesn't play nicely with 2.1 volts... my solution is to Keep the voltage controlled by EPP so that it is stable at 50 mhz faster. If you do want to change voltage go to the MIT in the BIOS and go to system voltage control set it to manual and then go to memory (Dram?) voltage to set it.
__________________
The solution to all of the problems of mankind is suicide. No man = no problem. I'm not immature! Just clinically insane. Quote:
|
|||||||||||||
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
