MADMAX22

ok does anyone here have this board or does anyone know anything about the bios options, because i am having aheck of a time ocing this thing ,

i understand all the basics from ocing my 939 stuff but in this board there is a cpu/c51 htt freq (which is cpu/northbridge fsb basically)
cpu/c51 htt multiplier ( regular multi 5x 4x 3x 2x 1x )

and these guys

c51/mcp55 htt freq (same as the one above for the cpu but its for northbridge/southbridge)

c51/mcp55 multi (same as above 5x 4x ... but for northbridge/southbridge)

now the thing is do you wnat to set these both to the same or jsut raise the front side bus for the cpu/northbridge and leave the other in auto or stock value or mathc it with what you doing to the first one

thanks for any info

MADMAX22

well i think i found part of my problem ocing this guy, apparently my 3.3v rail is not doing what its suppose to and i think its my mobo since i tried both my fsp 700w and my antec 500w and the same results its showing only 1.18, i am thinking maybe i did something to it when i was putting it to gether

Attached Thumbnails

 

Mr Pink57

Check BIOS for voltage as Speedfan can be wrong. It shows my Enermax 12v at 11.98v when its in fact at 12.22v

Also drop your HTT to x3 for any FSB over 250.

pink

__________________

The Specialist

Look at the VCore difference in Core0 and Core1 ...

A friend OCed a Sempron 3000+ AM2 on some NForce5 mobo and asked me same! At time he is running all at stock and only changed the CPU/Northbride freq...
Look that you have a good fan blowing on that heatpipes! These heatpipes work fine and did what the name said "HEAT..." (without good cooling)

__________________
E6600 @ 3.73