Skullzaflare

im having issues ><
i cant get it to detect my 2 hdd's
any suggestions?
tell me what you need to know

__________________
Miata joking lists: "You Know YOU are a NA Owner when..."
ive done it lol

s1rrah

What SCSI controller are you using?
What drives are you using?
Are you using external devices on the same SCSI controller?

__________________
...
Aumotocnic: "An unfortunate member of the overclock.net insomnia club"
...
OSAMT: "Member of OCN Songwriter and Musician Thread"
...
OHPC "Member of OCN Headphone Club!"
...

Skullzaflare

controller: Adaptec AHA-2940W-2940UW
hdd:HN45D011

all internal

just incase, the mobo is
http://www.tyan.com/archive/products/html/tigermp.html

__________________
Miata joking lists: "You Know YOU are a NA Owner when..."
ive done it lol

The Bartender Paradox

Its been a while so if I'm completely off, cut me some slack.

Are you daisy-chaining the hard drives? do the hard drives have built in terminators? If yes to both questions, then you might need to turn off the terminator in one, a jumper setting perhaps?

If the drives don't have built-in terminators, then you will need one.

If you have the drives on separate cables then make sure the terminators on both drives are on?


Again, its been a while, your drives might not even have terminator settings. Can you get one by its self to be recognized?


Perhaps skimming through this guide would help you get ideas on what is wrong?

__________________

Skullzaflare

lost me after the first paragraph lol
yes, they have an option for onboard terminators, all i have to do is move a jumper, but then the hdd doesnt power up. and yes, ive tried one at a time, and nothing recognizes

__________________
Miata joking lists: "You Know YOU are a NA Owner when..."
ive done it lol