N2Gaming

Ah ha. here it is. check it out man really cool. gives me idea's http://www.overclock.net/case-mod-wo...elligence.html

__________________

CorryBasler

I will have to check it out!

Gyro

results of my 1st attempt at oc :http://valid.x86-secret.com/show_oc.php?id=424647

got this far with just bus speed increases and a little of bit cpu volts, not even breaking a sweat yet.

stressed with orthos for hours
3dmark06-10664


thoughts or suggestions like lower multi, higher bus, ect..

specs: x2 5000 windsor 90nm w/hyper tx2 cooler @3003MHz -1.312v(1.25v stock)30c idle-46c load
M2N32-sli Deluxe
4x1gb oczddr2p800 pc-6400 dual channel x2 @858 @4-4-4-15 2t@2.1v(4-5-4-15 2t@2.1v stock)
bfg 8800gt oc2 @675core-975ram (stock) w/ accelero twin turbo cooler
cm extreme 600w psu

thanks Gyro

DaisukeJP

Ok guys..

i'm going to order a M2N-SLI board..
not the deluxe one..
can it still clock my AMD 5200+ and 5600+ to 3.2Ghz
with Artic Freezer 7 Pro aircooler?

__________________

Fast GPU's, huh WHAT?! .. we surpassed sonic speed

N2Gaming

good question? answer I don't know from experiance but as they say with any over clock sometimes it's just luck of the draw with the type of ram and cpu you get working together. I personally would not Know because I am reaching 3.2 on an unlocked cpu I would think that you can with a little patience and perseverance. I know it's not the answere you're looking for but one mans overclock might not be the same as yours with identical harware. good luck with what ever you chose to do. let us know if you get the board and how it works out for you. I'm sure some one here will have a better answer for you. Cheers with Rootbeeers

__________________

CorryBasler

Yeah its just the luck of the draw! Like me i got my 4400+ to 3.27GHz Stable and the 6000+ to 3.64Ghz Stable but most people only get to like 2.8Ghz on the 4400+ and 3.3 or so on the 6000+!

N2Gaming

Hey Corry. that's a Pretty good overclock. I had to low level and reload today on a two day old clean install becuase of either a hacker or virus. It's all good cause my system loaded os without any hickup's while overclocked at 3.2. I'm impressed with it so far. Do you know if it makes a difference if the the heatsink footprint is not as big as the cpu's footprint? This Zalman 9700 is a little smaller then the cpu and I'm wondering if it could cause heat related issues?

__________________

FireMarshallBill

I tried to get a good OC on mine but I could not raise the voltage higher than it already was... 1.35V is the max. Could I be missing something?

__________________

CorryBasler

Ive never used that board but its proulaly the max voltage of the board! Like mine is 1.565v so yours is lower as it is a lower board!

FireMarshallBill

BOOO lol thanks anyhow.

__________________