The ASUS M2N-SLI and M2N32-SLI Club! - Page 268 - Overclock.net

spaceballsrules · 07-05-09

Quote:

Originally Posted by thlnk3r

Spaceballsrules, you can do whatever you want. As far as I know there are no set rules on making "Unofficial" clubs. I say go for it

Good luck

OK.

I just wanted to make sure.

N2Gaming Keep me on the roster here. I still have my original M2N32 SLI still kicking butt and taking names

OSDCrusher · 07-05-09

Add me. http://www.overclock.net/system.php?i=38330

N2Gaming · 07-05-09

Quote:

Originally Posted by OSDCrusher

Add me. http://www.overclock.net/system.php?i=38330

I added you to the roster. Welcome to the club.

Quote:

Originally Posted by spaceballsrules

N2Gaming Keep me on the roster here.

Will do buddy.

Dale-C · 07-05-09

Quote:

Originally Posted by N2Gaming

You may also be able to push your FSB a little more with additional HT or Chipset voltage. Be forwarned doing so may kill your board if you don't keep a watchfull eye on your temps.

What are safe volts? Sorry I don't know much about chipset volts.
I have;

CPU to NB - 1.325
NB to BS - 1.325
NB Core/PCI-E - 1.250
SB Core/PCI-E - 1.5
SB Standby - 1.7

I also have my fan off of the stock HS on the heatsink near the IO bit if that helps. It is facing outwards towards my rear back/exhaust fan.

Quote:

Originally Posted by N2Gaming

I don't take any offense to your proposal of the M2N32 being the worste mobo you ever owned.

Well not quite the worst, maybe the most fiddily overclocking I spose, all BIOSes for this mobo are different, 1703 let me get 292FSB max.

Quote:

Originally Posted by N2Gaming

Have you lowered your cpu multi or is does the cpu lock out downward multipliers? I ask because I'd like to know if you have tried to find the limit of you mobo FBS w/your ram divider lowered and your cpu muliti lowered so just your mobo is being overclocked?

How do I change the RAM divider and yes I have lowered the Multi to 8 or so and FSB at like 300 and it doesn't boot, the CPU doesn't like 14x multi or 11 and under either on this mobo. Old GB M57 I had a 9.5 Multi on it.

I currently have it at 250x12 for 3Ghz so I get a 1250mhz HT Link and it is stable for everything I use but the Intel Burn Test or LinX.

N2Gaming · 07-05-09

For me I always kept the mobo volts at or just one notch above stock voltages. I would not over volt your PCIe or SB. Your ram divider will be under the ram settings. You may find those under cpu or processor I can't remember off the top of my head. Look for a setting like ddr800 then you can lower that to a lower ddr spd. I have never heard of running an intel cpu burn in test on a amd cpu.

Dale-C · 07-05-09

Yea I can change my RAM frequencies. Yeh the Intel Burn test is called IntelBurnTestV2.2 By AgentGOD, works on all CPUs, apparently the best CPU stresser.

Campo · 07-05-09

Anyone here run 1066 ram on these boards?

N2Gaming · 07-05-09

Quote:

Originally Posted by Campo

Anyone here run 1066 ram on these boards?

Yep I did. you can run ddr1066 at DDR800 and overclock the heck out of them or you can run them at ddr1066 if you have a cpu w/the ddr1066 ram controller that would be the Ph II cpu's and above.

Campo · 07-05-09

Quote:

Originally Posted by N2Gaming

Yep I did. you can run ddr1066 at DDR800 and overclock the heck out of them or you can run them at ddr1066 if you have a cpu w/the ddr1066 ram controller that would be the Ph II cpu's and above.

Sweet, thanks mate.

N2Gaming · 07-05-09

Why you are very welcome Campo.

		Overclock.net - Overclocking.net > AMD > AMD Motherboards
The ASUS M2N-SLI and M2N32-SLI Club!

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)