fritzII

Okay read the above posts and I can tell you some of the problems im having as well..

AMD Phenom(tm) 9850 Quad-Core Processor
2495 MHz clock speed
radeon hd 4850 x2
2 gig kingston khx8500d2k2/2gn ... in use but bios set at only 600mhz
2g corsair xms 2 cm2x1024-6400 .... cannot use gets wonky

First started by buying 4 sticks of the kingston 1066 and putting them in....almost melted my cpu. The heat coming off those copper coated pipes went through the roof and quickly. Also failed to boot. It seems that whenever I choose to put the memory in the 2nd dimm channels the amd wants to kill itself. Read the manual and saw that i should have done some homework. So i traded a friend the 1066 for the 800mhz corsairs and thought would work. Nope, computer starts and just blank screen and sounds like my video card keeps rebooting (no idea *** is happening here). So i take them out and change to setting on the kingstons to 1066 in bios...computer tries to start up and then says i have to reset bios to defualt or the computer wont boot. Im at a loss to the problem. the friend that i got the memory off of had them in the asus motherboard one step below this one and had no problems adding my 1066 to his.

Im at a total loss here. Any Ideas?