gerikoh

try flashing it through dos and usb.

__________________


Ultimate Quad Core Clock for Clock Benchmarks:

**The Prolimatech Club**

Thesis/HTPC Notebook: Puma's Cartwheel

AYGOO

hi

i wrote about my problem to foxconn ts and they solved simpler...

Dear ...
Thanks for supporting Foxconn product .
1.Please clear CMOS, then enter BIOS and "Load Optimized Defaults",
press F10 to save the setting and use fox liveupdate to downgrade again .
2. If the above steps can't fix the issue ,
please download the install the latest version of the Fox liveupdate to have a try :
http://www.foxconnsupport.com/downlo...=&sort=Utility

Best regards,
Foxconn Technical Support

i couldn't believe my eyes it's ok now, that's all. i tried many knotty things, and i overlooked this simple matter.
so, here is the solving to similar questions.

thanks the help gerikoh

tester330

No, that BIOS didn't help (((

gerikoh

i mean sensor problems with your cpu. just like what i'm experiencing now. there are a couple of phenom 2 owners here, particularly the 940be that are experiencing it too. or maybe you just need a better hsf for that 9950.

__________________


Ultimate Quad Core Clock for Clock Benchmarks:

**The Prolimatech Club**

Thesis/HTPC Notebook: Puma's Cartwheel

Krankfredwin

Hi folks, I'm new here, please bear with me. I have just installed 8GB of Gskill PC6400 RAM (4x2GB) but the system only appears to recognize 3.2Gig This regardless of where I insert the DIMMs. I'm running a Linux rig and somewhere in the depths of memory I vaguely remember a Windows limitation of 3.2G. Can anyone please tell me how to get around this problem? I need the memory to be able to install WinXP into a virtual M/C and run it concurrent with my #!Linux. Most grateful for any assistance.

Krankfredwin

i again, Here's a lesson for all you young folks out there - Put Brain In Gear Before Operating Fingers on Keyboard!!! I panicked, I was going to miss my deadline and so lost sight of what my problem really was. I've spent years (since the 80s) working in a 64 bit environment with DEC VAX not as an engineer I hasten to add but as a marketing consultant. nevertheless one "gets involved" and your mindset is hardened. I loaded #!Linux because I needed certain propriety programs that don't have a Linux equivalent. #!Linux is 32 Bit software. I offer up my posterior for a good kicking. Many thanks all for your patience.

Skydragon26

So is anyone else running into an issue were you lower the ht multi to like x8 or x7 and below and at the windows boot screen it turns pink and just sits there?

__________________
THE CHEVY Owners CLUB!!!

gerikoh

it's because there's a certain maximum gap of the ht speed and the nb multi. i think if the ht is 700mhz or more lower than of the nb speed, windows won't boot. if the difference is 1000mhz, it won't boot at all. i've also noticed that the max ht multi it can only take is 10x even if you had 11 or more. it must be another bios issue.

__________________


Ultimate Quad Core Clock for Clock Benchmarks:

**The Prolimatech Club**

Thesis/HTPC Notebook: Puma's Cartwheel

Skydragon26

hmmm foxconn needs to get to doing some bios work then =) or ppl are gonna be selling these and buying a different board, i also wondering, nbvid is built into nbcore on this board, In the bios i see no option for nbvib.

__________________
THE CHEVY Owners CLUB!!!

gerikoh

yeah. i'm really wondering where nbvid is too.

__________________


Ultimate Quad Core Clock for Clock Benchmarks:

**The Prolimatech Club**

Thesis/HTPC Notebook: Puma's Cartwheel