|
|
|
 |
Overclock.net - Overclocking.net > AMD > AMD Motherboards | |
Problem with Voltages Help!!!
|
||
 |
|
|
LinkBack | Thread Tools |
06-25-09
|
#1 (permalink) | ||||||||||||
|
New to Overclock.net
|
Problem with Voltages Help!!!
Hi guy i'm new of this forum
__________________ And i need of your helps!!!!!I have this Configuration: RAM:Corsair DDR2 TWIN2X4096-6400C4DHX 4GB (2GB x 2) CAS 4 ALI:CORSAIR 550W CMPSU-550VXEU GPU:Sapphire 4870 512MB GDDR5 CPU:AMD Phenom II X3 720 2.8Ghz 3x512KB Black Edition MB: Asus M4A78-EM HD:SEAGATE Barracuda 500GB SATAII 32MB ST3500320AS CASE:Cooler Master Elite 332 I'm trying to Overclock My Cpu....but i have a problem,i can't modify voltages from my bios!voltages appears automatically....and my voltage of default is 1.392/1.408v at 2.8GHZ and how can u see it's not stable!!Always change...I had disable : -Cool and quiet -Q-fan -C1e But my voltage is unstable...and if i use AMD Overdrive and i set voltage at 1.48v it,in CPU-Z and probe II, swings between 1.420,1.440 at 1480v!!  how can I stabilize the voltage?????
Last edited by Teskin : 06-25-09 at 02:44 AM |
||||||||||||
|
|
|
06-25-09
|
#2 (permalink) | ||||||||||||
|
Windows Wrangler
 
|
turn off all amd features in the bios. then you should be able to modify your voltages.
__________________
OC it till it burns!!! LOL
|
||||||||||||
|
|
|
|
06-25-09
|
#3 (permalink) | ||||||||||||
|
New to Overclock.net
|
In my bios i have this features:
__________________JUMPERFREE : -CPU Overclocking Manual mode 200 -GPU Overclocking AUTO -PCIE Overclocking AUTO -PROCESSORFREQUENCY MULTIPLIER I have change it to 17x -CPU OVERVOLTAGE +50mv -VDDNB OVER VOLTAGE AUTO -HT SPEED AUTO -HT WIDTH AUTO -MEMORY CLOCK MODE AUTO -DRAM TIMING MODE AUTO -MEMORY OVERVOLTAGE AUTO -CHIPSET OVER VOLTAGE +33mv CPU CONFIGURATION: -GART ERROR REPORTING DISABLE -MICRODE UPDATION ENABLE -SECURE VIRTUAL MACHINE MODE DISABLE -COOL AND QUIET DISABLE -CPU PREFETCHING ENABLE -C1E DISABLE HW CONFIGURATION: -SMART Q-FAN DISABLE The voltage are unstable in bios........if i update Bios can i resolve it???
|
||||||||||||
|
|
|
|
06-25-09
|
#4 (permalink) | ||||||||||||
|
Windows Wrangler
|
pcie = 100mhz
i'm gonna say disable cpu prefetching also you can check for an bios update. dunno if that will help tho
__________________
OC it till it burns!!! LOL
|
||||||||||||
|
|
|
|
06-25-09
|
#5 (permalink) | |||||||||||||
|
New to Overclock.net
|
I am in the exact same boat, similar board same chip. If I set everything to auto (including voltage) and up the multiplier it raises my voltage to dangerous levels. But I can't do it manually because it fails overclock.
__________________
|
|||||||||||||
|
|
|
|
06-25-09
|
#6 (permalink) | |||||||||||||
|
Overclocker
 
Join Date: Jun 2007
Location: NORTH CAROLINA
Posts: 1,866
Rep: 180
 Unique Rep: 159
Trader Rating: 16
|
Go back into bios and manually set ur ram timmings and set ur ram voltages to what it says on the sticker on the ram itself. U have to take cpu voltage off auto and set to the lowest setting u have or voltage will climb with overclock.
__________________
IF IT'S BROKE, FIX IT! IF IT'S NOT BROKE FIX IT SOME MORE!!!!!  http://service.futuremark.com/compare?3dm06=7263495 http://valid.canardpc.com/show_oc.php?id=536862 The BIOSTAR T-Power I45 Club CM Storm + Sniper CLUB
|
|||||||||||||
|
|
|
06-26-09
|
#7 (permalink) | ||||||||||||
|
New to Overclock.net
|
I think that i have resolve default voltage with update of bios,so i have 1.290V at 2.8ghz that i have set at 3.2ghz
__________________ but from bios i have max voltage at 1.440V so i have test,with orthos for one and half hour at 3.5ghz stable!! So if i would like set up more CPU i must use AMD Overdrive.....P.s. I have resolve the default voltage but i have still problem of instability of voltage!!
|
||||||||||||
|
|
|
|
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|
