*Unofficial* Asus Crosshair II Formula AM2+ Owner's Club - Page 4 - Overclock.net

spaceballsrules · 07-08-09

Quote:

Originally Posted by sp4wners

Look at this baby

http://service.futuremark.com/compare?3dmv=1219381
I finally broke 14k points

Nice

spaceballsrules · 07-08-09

OK I just flashed to 1802 and all seems normal.

sp4wners · 07-09-09

I've checked it too yesterday, downgraded it to 1702 and everything was the same, just like in 1802. So I returned to 1802 again..

Stalker · 07-09-09

Yep, no difference.

Quote:

Description Crosshair II Formula BIOS 1802
Fix the system might hang on POST if SLI-Memory is enabled in BIOS.
File Size 737.18 (KBytes) 2009/05/13 update

<- From the site

Newbie2009 · 07-09-09

Quote:

Originally Posted by sp4wners

I've checked it too yesterday, downgraded it to 1702 and everything was the same, just like in 1802. So I returned to 1802 again..

That O'C, What temps you getting, you are on air right? Also whats the voltage?

sp4wners · 07-09-09

42 on Idle, 58-59 on Load. And Yes I'm using Air, I have everything on Air, ram, hdd, mobo, cpu, gpu, dvd-rom etc. :P Now I'm using 3.75GHz because 3.94GHz was unstable after 37 hours of using it :P And i used 1.55v Vcore, 1.48v HT and 2.2v for RAM (For 3.94GHz). For 3.75GHz I'm using 1.475v for Vcore, 1.40v for HT, and 2.2V for RAM. Now my temps are 38-39 Idle, and 53-55 Load

Newbie2009 · 07-09-09

You noticed much of a jump in temps between 3ghz & 3.75?

sp4wners · 07-09-09

It's weird but... No... o.O On idle I had 35-37, after overclocking about 38-39, on Load 49-52 on stock, after overclocking 50-55, so it's not a big jump between stock and OC'd.

EDIT: have a question. After changing my board from MA78G-DS3H to Crosshair II Formula I've noticed that CPU-z - also 1.51 & 1.52 show my CPU VID only at 1.350 V and it's not changing. When I had my MA78G-DS3H it show CPU VID I actually set in BIOS, but after changing my mobo it shows only 1.350V and it doesnt changing

Newbie2009 · 07-09-09

Quote:

Originally Posted by sp4wners

It's weird but... No... o.O On idle I had 35-37, after overclocking about 38-39, on Load 49-52 on stock, after overclocking 50-55, so it's not a big jump between stock and OC'd.

EDIT: have a question. After changing my board from MA78G-DS3H to Crosshair II Formula I've noticed that CPU-z - also 1.51 & 1.52 show my CPU VID only at 1.350 V and it's not changing. When I had my MA78G-DS3H it show CPU VID I actually set in BIOS, but after changing my mobo it shows only 1.350V and it doesnt changing

Not bad at all! My V8 runs a degree or two hotter, but I know I put too much paste on it lol. Never got around to fiting that.

Download it again and see.

spaceballsrules · 07-09-09

Quote:

Originally Posted by sp4wners

It's weird but... No... o.O On idle I had 35-37, after overclocking about 38-39, on Load 49-52 on stock, after overclocking 50-55, so it's not a big jump between stock and OC'd.

EDIT: have a question. After changing my board from MA78G-DS3H to Crosshair II Formula I've noticed that CPU-z - also 1.51 & 1.52 show my CPU VID only at 1.350 V and it's not changing. When I had my MA78G-DS3H it show CPU VID I actually set in BIOS, but after changing my mobo it shows only 1.350V and it doesnt changing

Hey sp4awners. I have the same problem. CPU-Z shows my voltage at 1.30 even though I changed it to 1.325. I would not trust CPU-Z to be correct on everything.
Everest is the best program to check that everything is working at the correct settings.

		Overclock.net - Overclocking.net > AMD > AMD Motherboards
Unofficial Asus Crosshair II Formula AM2+ Owner's Club

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)