viprk24

I recently had problems with my motherboard
with updating bios .... At first it went fine but couldnt
overclock the CPU after
so i went to the site and Went to reFlash And update my bios
using there software and bluescreen while updateing and now the bios isnt there any ideas
how to recover


Plz help lol

biostar AMD760G m2+

Djghost454

Sounds like you bricked your mobo. As far as I know, RMA is your only option.

Sorry

PS, Don't update bios from windows.

__________________

Windows 7║Fan Club

Spanky93

I'm going to have to agree with him.

viprk24

No guys Theres a way to in my manual
this one way to recover
It said something about Putting A certain file onto a floppy/CDr or Flash drive
and holding down Ctr and home key but need some help
with doing so
Ima post link to the Site telling how to
manual
and the Download location to bios info that i know of
i just dont know how i should change the name of the bios information heres linkys please help


http://www.bebmg.de/v3/app/de/support/faq.php?S_ID=392 how to recover
http://www.bebmg.de/v3/app/de/mb/bios.php?S_ID=394 and this is Link to support drivers page click Manual to get the Manual to my board


I swear ill paypal money to whoever helps me get my pc back up and running
need for work lol

XDRM

Ok here is whta i would do in your case!!!!
1.download and save the bios you wnat to a floppy with its curent name as it comes fromm the biostar site
2.would do the steps biostar says with the cntr and home button

if that doesnt work i would rename the bios file to AMIBOOT.ROM and do the same steps again!!!!if that fails too then i think you need to rma the board i am sorry!!!!and do not update bios from windows as Djghost454 mentioned before!NEVER try that again a friendly advise!!!!!

And i dont want money!just to clariefy that!

viprk24

yea i will try that but i need to find the file for AMIBOOT.ROM
but ill try what u said

But my only drive is sata
it says u need ide

TEntel

If the bios didn't flash correctly and the board won't post, how on earth will you be able to boot a floppy?

__________________
WMP12>>320 KB/s mp3>>HT Omega Claro>>Audio Technica ATH-A700

jspeedracer

If your computer crashes in the middle of flashing the bios it is not going to work again without a new bios chip. When flashing through windows first it will wipe the boot block (all bios info), then load the new bios. If it crashes while doing any of this then you won't have a bios installed and your computer will not be able to boot it will just load a black screen. You have to get the bios to load in order to flash from a floppy. If you have a dual bios board you may be able to still flash but if you have a biostar board I think you might be out of luck. I've killed a couple boards flashing the bios but I always buy my boards at microcenter so I can return just for that reason. Good luck though, If you do find some way to fix this let us all know because I don't think it's been done before. If someone knows a way I would love to know how myself

__________________
10,834 - 3dmark06

CPU-Z

viprk24

NVM Mother board is out Biostar said that if there is no posting or no screen activity that means that the Bios is damaged and need new chip

viprk24

Well Thx to biostar im down 80 bucks lol