|
![]() |
Overclock.net - Overclocking.net > AMD > AMD Motherboards | |
'overclock causing slow boots?'
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | ||||||||||||
|
AMD Overclocker
|
well what it is ,i had an asrock 939dual sata 2 and a 3200+amd64 i was running it at 2.3ghz stabel on prime 95 for 2 hours and no erros etc but when i start my computer up it loads but it takes ages to load all the stuff at the start
__________________multipler=10x 2000mhz vcore =142/148 v fsb= 229 memroy timming are in my profile and my graphics card is rubbish what is going on with it ??
|
||||||||||||
|
|
|
|
|
#2 (permalink) | ||||||||||||
|
Intel Overclocker
|
If you drop everything back to stock does it do this?. Also you might want to run a memtest for a few passes then run Prime95 for like 4 hours. If memtest fails, either put a divider on it, ease up on the timings some more or increase the voltage a little bit. Also post what ram you have exactly, and you may need more voltage on the CPU, I'm not sure what they like though.
__________________
|
||||||||||||
|
|
|
|
#3 (permalink) | ||||||||||||
|
AMD Overclocker
|
__________________
|
||||||||||||
|
|
|
|
|
#4 (permalink) | ||||||||||||
|
AMD Overclocker
|
also when i drop the setting back it loads faster
__________________im am using an asrock board 939 sata 2 dual and max vcore =1.45 v also i had it up to 2.3 with no crashes i currently dont have the board as i have blown it up shocking but getting a new one i hope and if not the a dfi nf4 sli ![]()
|
||||||||||||
|
|
|
|
|
#5 (permalink) | |||||||||||||
|
Going Broke Overclocking
![]() |
Blown up?
Are there burnt sections on the PCB or what?
__________________
"Life is Learning, Learning is Sharing, Sharing is Life" "Overclocking is like a drug addiction, the difference is we go broke improving our brain cells instead of destroying them!" Where in the world to buy on-line Dual or Multi Partition and Why
Everyone, GET Folding, it is important no matter how much you contribute ![]()
|
|||||||||||||
|
|
|
|
#6 (permalink) | ||||||||||||
|
AMD Overclocker
|
no there isnt no sign of burn marks or any damage i think i broke the bios but im not sure just hope it wasent the chip that blew up im waiting to here if it was an actually factory problem when i would switch the wall socket on the fans in my oc would switch on for like 1 sec then go of
__________________ then when it wasent starting i would put the wall socket on and they would stay on but running at low speeds weird so hopefully il get the a new board then in a couple of months buy a new board hoping to only spend £100 -$167 somthing in that area any idears i like the DFI Lanparty UT NF4 Ultra nice board or is there better for the money
|
||||||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|