Darksylum

Hi everyone, System is listed down below with complete config.

I am having a hard time keeping stable overclocks and i think its going to be HT and memory related. I am running 4x 2gb sticks and I have the memory voltage set correct. my motherboard boast you can boost the HT link to 2600mhz at 5200MTS. BHow do i go about adjusting the HT link and voltage to get max results while stable? i am fairly new at overclocking and so far have only worked with the Multiplier of the cpou and cpu/nb voltages.

Any advice would be great. thank!

__________________
Do unto your computer as you would do unto your wife!
A head shot is only as good as the fps and ping that it is shot on.
Crapping red pew pew on the green boys since 1994!
You can't stop the RED TIDE

Enigma8750

With amd when you are overclocking you have to boost your Northbridge voltage to about 1.3375 to 1.3475. Boost your Vcore to the same voltages for memory sake and drop your HT down about 200 from 4000 to 3600 or from 2000 to 1800. Put your memory ganged and 2T. Try that and see what you get. Keep the Cmos clear switch handy. You may have to play with it a bit, but I think you will make it with this advise.

__________________

Proud Phenom1st