Originally Posted by r31ncarnat3d

You still might want to remove a channel though. General rule of thumb is that all RAM on your motherboard should be matched if you want to overclock, as each pair might have different settings than the other (i.e., your 1GB sticks may have latencies of 4-4-4-12 and can take up to 2.0V, while your 512MB sticks may have latencies of 5-5-5-15 and can take up to 2.2V).

However, if you're happy with the overclocks you've already achieved, and don't plan on pushing it any further, then there's no need to take out some RAM

Also, I'm not too sure about 1.4 GHz; I'm an Intel OCer myself, and 1.4 is the danger zone for my CPU; it probably is different for AMD's chips, but some research would never hurt

Originally Posted by xFALL3Nx

my ram is diff voltages... my 1gb is sapossed to be 2.1 volts, 512mb is saposed to be 1.8. there both 4-4-4-12 ram. i just have then set at 2volts.

my pc wouldn't boot a wile ago... added .100mv to my north bridge and it booted fine. i was going to get another 1gb kit, but tmy kits is 60 now insted of 30 =[ screw ddr3

also, i set my cpu vcore to 1.425 and cpuid reads 1.408 o.0

Originally Posted by r31ncarnat3d

That's normal; it's called VDroop. The VDroop seems well within normal parameters, so no need to worry about it.

You're now the owner of one great OC board

Originally Posted by r31ncarnat3d

That's normal; it's called VDroop. The VDroop seems well within normal parameters, so no need to worry about it.

You're now the owner of one great OC board

Originally Posted by ProjecT TimeZ

What's unacceptable is saying what other people think are unacceptable are unacceptable.

Whew, wrap your brain around that ^^ lmao.

Originally Posted by Jtwizzle

Actually that's vDrop.

Originally Posted by r31ncarnat3d

Coulda sworn there was an extra "O" in there...

Ah, well, I stand corrected

Originally Posted by ProjecT TimeZ

What's unacceptable is saying what other people think are unacceptable are unacceptable.

Whew, wrap your brain around that ^^ lmao.