|
![]() |
Overclock.net - Overclocking.net > AMD > AMD Motherboards | |
loads of problems and head aches!!
|
||
![]() |
|
|
LinkBack | Thread Tools |
|
|
#1 (permalink) | ||||||||
|
Overclocker
|
ok people... new year hasnt started all that well for me now
__________________hmm suddenly for the last 2-3 days my pc`s just hangs up dunno how and why but it does.. and today morning.. when i started it (After a couple of hangs) my bios got reset!!!! what ****. how can that happen???? and now its becoming ever so difficult to start the comp.. i`m thinking its a psu problem.. currently running my comp with my optical drives plugged out(this way it seems to work most of the time) ( i got a sony cd-rw and a benq 1640)..but still it hangs in the middle of no where( man i got rid of those krauts in cod2 and my comp hung up and now i gotta play the whole darn mission again!!!! ) could it be a psu problem?? i cant seem to get hold of another psu to cross check.. or could it be the problem with the a8n - sli board( where in it doesnt like pata drives) and that`s causing problems.. also my chipset fan has been out of order(not working) for quite sometime now . . so its been running without a fan to cool the chipset ..so is this a case of chipset running hot?? would the chipset develop problems with the fan not running?? (it`s still attached to the heatsink though and connected to the 3-pin thingy.. but it doesnt work!) damn how do i know if this is the problem? pls help me .. thank you.
Last edited by chic_magnet : 01-05-06 at 09:14 AM. |
||||||||
|
|
|
|
|
#2 (permalink) | |||||||||||||
|
Overclocker
|
The fan on the chipset could cause you a major problem .It was put on there to keep the chipset cool . When i installed mine for the fisrt i didnt w/c the chipset but i didnt notice the fan not spinning and i kept getting reboots (remind you of anything )
__________________
|
|||||||||||||
|
|
|
|
|
#3 (permalink) | ||||||||
|
Overclocker
|
hmmm achha.. me getting an abit chipset fan from a friend of mine.. this weekend.. will bear the reboots till then i guess...:P
__________________btw it cannot be a psu problem?? can it be? pls let me know thanks..
|
||||||||
|
|
|
|
|
#4 (permalink) | |||||||||||||
|
PC Gamer
|
ouch running the mobo without the chipset fan is bad news, it's there for a reason, your chipset could be toast.
__________________
|
|||||||||||||
|
|
|
|
|
#5 (permalink) | |||||||||||||
|
Overclocker
|
Those colorsit psu are ok in normal sitiations for office pc,s and runnning hardware at normal speeds but dont try to o/c to high they will let you down .but i dont think tiss is your problem . If you have a spare fan laying around just position it in friont of the chipset .with a bit of luck it will stop the reboots till you can get a proper one
__________________
|
|||||||||||||
|
|
|
|
|
#6 (permalink) | ||||||||||||||
|
Overclocker
|
Quote:
|
||||||||||||||
|
|
|
|
|
#8 (permalink) | ||||||||
|
Overclocker
|
ok my bios is 1012-003.. do i need to upgrade????? or should i say should i upgrade?
__________________and i did get my voltages checked and they all seemed fine... and ya my system was and currently is at stock settings.. only 1 month after i got my system did i overclock but that only lasted for like 30 odd days .. and that was around 5 months ago ![]() right now i got no other solution for the chipset fan .. will get the abit fan and then chk...
|
||||||||
|
|
|
|
|
#9 (permalink) | |||||||||||||
|
Overclocker
|
I have the 1016 BIOS and it,s never played me up but you must update the chipset drivers to 6.6 from the ASUS support section http://support.asus.com/download/dow...Language=en-us Update your chipset first then the BIOS
__________________
|
|||||||||||||
|
|
|
|
|
#10 (permalink) | ||||||||
|
Overclocker
|
hmm i got these..
__________________nForce4_amd_6.66_winxp2k_international... that`s the chipset driver right that you are talking abt?? or should i now downgrade to 6.65? or upgrade to 6.70??
Last edited by chic_magnet : 01-05-06 at 09:54 AM. |
||||||||
|
|
|
![]() |
| Currently Active Users Viewing This Thread: 1 (0 members and 1 guests) | |
| Thread Tools | |
|
|